Menu
Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
+43 7242 9396 1650
« SURFACE PROTECTION AND TREATMENT

Wire Guard

WIRE GUARD is a highly adhesive lubricant which is universally applicable in the automotive, heavy duty, maintenance and construction industries. WIRE GUARD prevents corrosion of parts such as engine block, transmission parts and suspension. WIRE GUARD protects electronic wiring, ignition cables, brake and coolant hoses, V-belts, dust covers, bellows or suspension systems. WIRE GUARD also protects all unshielded wire bundles, electrical boxes, garden lighting, machinery, flexible hoses, rubber hoses,...

  • Protection against corrosion
  • Reduction of wear and friction
  • User-friendly
  • Excellent adhesion
  • Nearly odourless
  • Spray pattern: Jet
Article nr Name Content
T112004 Wire Guard 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Base: Mixture of synthetic oils, anti-wear- and anti-corrosion additives.
Propellant: Propane/Butane
Physical state: Aerosol
Colour: colourless
Odour: characteristic
Delivery rate (20ºC): 1,6 g/s
Pressure (20°C): 4 Bar
Vapour pressure (20°C): 8300 hPa (74-98-6 propane)
Density (20°C): 0.666 – 0.67 g/cm³
Initial boiling point and boiling range: -44.5 °C
Lower explosion limit: 1,1 Vol% (Hydrocarbons,C6,isoalkanes, < 5% nhexane)
Upper explosion limit: 10,9 Vol% (74-98-6 propane)
Flash point: -40°C (9003-29-6 Polybutene (Isobutylene/butene coplymer)) 

Ignition Temperature: > 200°C (Hydrocarbons,C6,isoalkanes, < 5% n-hexane) 
pH-value: Mixture is non-polar/aprotic.
Kinematic viscosity: ≤ 20,5 mm²/s, 40°C (L)
VOC: 72,50%
Typical base polymer properties:
40°C: 19500 cSt
100°C: 630 cSt
Flashpoint: -40 °C
Application temperature: 10°C – 35°C
Temperature range: -20°C – 180°C
Shelf life: 1 year
Storage confitions: Cool and dry (10°C – 20°C)

  • APPLICATION:
    Lubricant for moving parts subjected to high pressures, impacts and vibrations as moving machine parts, wire ropes, worm screws, chains, cables etc.
  • USE:
    -Shake before use.
    - If necessary clean moving parts before application with a standard degreaser.
    - Spray from a short distance the parts to lube.
    - Allow the product to flow.
    - Wait a few minutes to let the solvents evaporate.
    - Remove excess of lubrication.
    - Keep away from heat/sparks/open flames/hot surfaces. No smoking. Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Avoid breathing spray. Wear protective gloves/eye protection. Use only outdoors or in a well-ventilated area.
pdf Product Information
techmasters_en_wig_PDS.pdftechmasters_en_wig_PDS.pdf (1.7 MB)
pdf MSDS T112004 Wire Guard 500ml V2
MSDS_T112004_Wire_Guard_500ml_T112004_V2_en_AT.pdfMSDS_T112004_Wi...04_V2_en_AT.pdf (397.1 KB)

Wire Guard

WIRE GUARD is a highly adhesive lubricant which is universally applicable in the automotive, heavy duty, maintenance and construction industries. WIRE GUARD prevents corrosion of parts such as engine block, transmission parts and suspension. WIRE GUARD protects electronic wiring, ignition cables, brake and coolant hoses, V-belts, dust covers, bellows or suspension systems. WIRE GUARD also protects all unshielded wire bundles, electrical boxes, garden lighting, machinery, flexible hoses, rubber hoses,...

  • Protection against corrosion
  • Reduction of wear and friction
  • User-friendly
  • Excellent adhesion
  • Nearly odourless
  • Spray pattern: Jet
Article nr Name Content
T112004 Wire Guard 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Base: Mixture of synthetic oils, anti-wear- and anti-corrosion additives.
Propellant: Propane/Butane
Physical state: Aerosol
Colour: colourless
Odour: characteristic
Delivery rate (20ºC): 1,6 g/s
Pressure (20°C): 4 Bar
Vapour pressure (20°C): 8300 hPa (74-98-6 propane)
Density (20°C): 0.666 – 0.67 g/cm³
Initial boiling point and boiling range: -44.5 °C
Lower explosion limit: 1,1 Vol% (Hydrocarbons,C6,isoalkanes, < 5% nhexane)
Upper explosion limit: 10,9 Vol% (74-98-6 propane)
Flash point: -40°C (9003-29-6 Polybutene (Isobutylene/butene coplymer)) 

Ignition Temperature: > 200°C (Hydrocarbons,C6,isoalkanes, < 5% n-hexane) 
pH-value: Mixture is non-polar/aprotic.
Kinematic viscosity: ≤ 20,5 mm²/s, 40°C (L)
VOC: 72,50%
Typical base polymer properties:
40°C: 19500 cSt
100°C: 630 cSt
Flashpoint: -40 °C
Application temperature: 10°C – 35°C
Temperature range: -20°C – 180°C
Shelf life: 1 year
Storage confitions: Cool and dry (10°C – 20°C)

  • APPLICATION:
    Lubricant for moving parts subjected to high pressures, impacts and vibrations as moving machine parts, wire ropes, worm screws, chains, cables etc.
  • USE:
    -Shake before use.
    - If necessary clean moving parts before application with a standard degreaser.
    - Spray from a short distance the parts to lube.
    - Allow the product to flow.
    - Wait a few minutes to let the solvents evaporate.
    - Remove excess of lubrication.
    - Keep away from heat/sparks/open flames/hot surfaces. No smoking. Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Avoid breathing spray. Wear protective gloves/eye protection. Use only outdoors or in a well-ventilated area.
pdf Product Information
techmasters_en_wig_PDS.pdftechmasters_en_wig_PDS.pdf (1.7 MB)
pdf MSDS T112004 Wire Guard 500ml V2
MSDS_T112004_Wire_Guard_500ml_T112004_V2_en_AT.pdfMSDS_T112004_Wi...04_V2_en_AT.pdf (397.1 KB)
1. Choose location
TECH-MASTERS Group
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
2. Cookies

We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information:  Privacy policy incl. cookie settings | General terms and conditions

Accept cookies

Cookie Settings

×
  • What are cookies?
  • Required Cookies
  • Performance Cookies
  • Marketing Cookies

What are cookies?

Cookies are text files that are stored by a browser on the end device to store certain information. With this information, our website recognizes that you have already visited it. We use this to prepare the information accordingly. Your personal data will not be saved.

Required Cookies

These cookies control functions without which our website cannot be used to its full extent. These cookies are only used by us (our own cookies). As a result, this information is only used and processed by our website. For example, you don't have to log in again every time you log in.

Performance Cookies

“Google Analytics” and “Google Tag Manager” are used to collect information on how our website is used. These cookies help us, for example, to determine whether and which sub-pages of our website are visited and what content the users are interested in. We primarily record the number of visits and their duration. Note on data processing in the USA: According to the case law of the European Court of Justice (judgement of July 16, 2020, case ref.: C-311/18 (“Schrems II”)) no adequate level of data protection exists in the USA. In addition, government surveillance measures in the USA may result where no adequate legal protection can be sought against these measures. In particular, US security and secret services may have access to your data without you being informed and without you being able to take legal action against it. The data processing in the USA in connection with the data processed by Tech-Masters Trading GmbH is based on your consent in the sense of Art. 49 para. 1 lit a) in conjunction with Art. 6 para. 1 lit a) GDPR. You can revoke your consent at any time non-retroactively. Understanding the above information on data protection in the USA, I also consent to the processing of personal data in the USA if and to the extent that I give my consent to the use of cookies via configuration of the cookie settings. I may revoke my consent at any time non-retroactively.

Marketing Cookies

We show "Youtube" videos for some products. This marketing cookie comes from Google and collects information about the websites visited by the user in order to create targeted advertising for the visitor. In this context, we do not process any personal data without your consent in accordance with Article 6 (1) (a) GDPR.