Region:
no location selected Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Techno Screen MS

Product variant for
General «
General
Automotive

TECHNO SCREEN is an isocyanate-free, permanent
flexible, moisture cured 1-component  Sealant
based on MS polymer  especially designed for
Windows screen application  with a high degree
of strength, which polymerizes rapidly under the effect of atmospheric moisture. It respects even the strictest Health & Safety rules because it is environmentally friendly.
Euro NCAP Certification PSI-11-0160-009.(Euro Ncap frontal  impact sled test).

  • Excellent adhesion without primer!
  • Solvents, isocyanate and silicone free!
  • Long shelf life – even after opening!
  • Easy to remove from your hands!
  • Environmentally friendly!
  • Odorless
  • Based on MS Polymer
  • EURO NCAP CERTIFICATION PSI-11-0160-009
Article nr Name Content
T570101 Techno Screen MS 290ml 290ml
T570102 Techno Screen MS 600ml 600ml
T570103 Techno Screen MS 400ml 400ml

  • Technical data
  • Application and usage
  • Downloads

Chemical base: 1-K Modified Silane Polymer
(MS Polymer)
Colour:  Black
Consistency: Pasteus, very good steadfastness
Shore Hardness (A)
– DIN53505 at +23°C / 50% rH:  
Shore A57 (Thickness 6mm after 4 weeks)
Working temperature: from +5°C to +35°C
Temperature resistance: from -40°C to +90°C
Potlife at +23°C / 50% rH: < 15 Min.
Tack free time at +23°C / 50% rH: 15 Min.
Full through cure – DIN 50014
at +23°C / 50%rF: 3mm / 24 Std.
“Drive away time”: 1 hour
Change of weight – DIN50014: 1% 14 days
Green strength: 600 Pa, electrical current

measure MC100
Brake elongation – DIN 53504: 2,7 MPa
Pull Strenght – DIN 53504: 1,7 MPa
Lap Shear Strenght – DIN 5328: 2,5 MPa
Tear Propagation Strenght – DIN 53515: 16N/mm²
Torsion stiffness: 1,92 MPa (using a Poission ratio
of 0,43)
Elongation – DIN53283:  180%
Module at 100% Elongation - DIN53504 S2
at 7 Days/ +23°C / 50%r:  2,3 MPa
Electrical volume resistivity: 10ˆ11 Ohm cm
Shelf life at 4-22°C / 50% rH: 12 Months. 
Keep cool and dry. Keep away from direct sunlight.
 

  • TECHNO SCREEN  has been specially designed for bonding of fixed glass in automotive repair. It Allows a drive away time of 1 hour* in vehicles with or without airbag.
    *Providing the ambient temperature is at least 23°C and relative humidity 50%. At lower temperatures and humidities drive away time will be longer.
  • GLASS PREPARATION: (New screen) Ensure that the surface of the glass is clean and dry. Use a clean dry cotton cloth, wet it, rub the surface of the glass to be treated, leaving a very thin film. Then clean the surface using Multifoam with a dry and clean cloth and allow to dry to a minimum of 3 minutes, the surface must be covered by the sealant within 30 minutes.

Techno Screen MS

Product variant for
 «
General
Automotive

TECHNO SCREEN is an isocyanate-free, permanent
flexible, moisture cured 1-component  Sealant
based on MS polymer  especially designed for
Windows screen application  with a high degree
of strength, which polymerizes rapidly under the effect of atmospheric moisture. It respects even the strictest Health & Safety rules because it is environmentally friendly.
Euro NCAP Certification PSI-11-0160-009.(Euro Ncap frontal  impact sled test).

  • Excellent adhesion without primer!
  • Solvents, isocyanate and silicone free!
  • Long shelf life – even after opening!
  • Easy to remove from your hands!
  • Environmentally friendly!
  • Odorless
  • Based on MS Polymer
  • EURO NCAP CERTIFICATION PSI-11-0160-009
Article nr Name Content
T570101 Techno Screen MS 290ml 290ml
T570102 Techno Screen MS 600ml 600ml
T570103 Techno Screen MS 400ml 400ml

  • Technical data
  • Application and usage
  • Downloads

Chemical base: 1-K Modified Silane Polymer
(MS Polymer)
Colour:  Black
Consistency: Pasteus, very good steadfastness
Shore Hardness (A)
– DIN53505 at +23°C / 50% rH:  
Shore A57 (Thickness 6mm after 4 weeks)
Working temperature: from +5°C to +35°C
Temperature resistance: from -40°C to +90°C
Potlife at +23°C / 50% rH: < 15 Min.
Tack free time at +23°C / 50% rH: 15 Min.
Full through cure – DIN 50014
at +23°C / 50%rF: 3mm / 24 Std.
“Drive away time”: 1 hour
Change of weight – DIN50014: 1% 14 days
Green strength: 600 Pa, electrical current

measure MC100
Brake elongation – DIN 53504: 2,7 MPa
Pull Strenght – DIN 53504: 1,7 MPa
Lap Shear Strenght – DIN 5328: 2,5 MPa
Tear Propagation Strenght – DIN 53515: 16N/mm²
Torsion stiffness: 1,92 MPa (using a Poission ratio
of 0,43)
Elongation – DIN53283:  180%
Module at 100% Elongation - DIN53504 S2
at 7 Days/ +23°C / 50%r:  2,3 MPa
Electrical volume resistivity: 10ˆ11 Ohm cm
Shelf life at 4-22°C / 50% rH: 12 Months. 
Keep cool and dry. Keep away from direct sunlight.
 

  • TECHNO SCREEN  has been specially designed for bonding of fixed glass in automotive repair. It Allows a drive away time of 1 hour* in vehicles with or without airbag.
    *Providing the ambient temperature is at least 23°C and relative humidity 50%. At lower temperatures and humidities drive away time will be longer.
  • GLASS PREPARATION: (New screen) Ensure that the surface of the glass is clean and dry. Use a clean dry cotton cloth, wet it, rub the surface of the glass to be treated, leaving a very thin film. Then clean the surface using Multifoam with a dry and clean cloth and allow to dry to a minimum of 3 minutes, the surface must be covered by the sealant within 30 minutes.

Techno Screen MS

Product variant for
 «
General
Automotive

TECHNO SCREEN is an isocyanate-free, permanent
flexible, moisture cured 1-component sealant
based on MS polymer especially designed for
windows screen application with a high degree
of strength, which polymerizes rapidly under the effect of atmospheric moisture. It respects even the strictest Health & Safety rules because it is environmentally friendly.
Euro NCAP Certification PSI-11-0160-009.(Euro Ncap frontal  impact sled test).

  • Excellent adhesion without primer!
  • Solvents, isocyanate and silicone free!
  • Long shelf life – even after opening!
  • Easy to remove from your hands!
  • Environmentally friendly!
  • Odorless
  • Based on MS Polymer
  • EURO NCAP CERTIFICATION PSI-11-0160-009
Article nr Name Content
T570101 Techno Screen MS 290ml 290ml
T570102 Techno Screen MS 600ml 600ml
T570103 Techno Screen MS 400ml 400ml

  • Technical data
  • Application and usage
  • Downloads

Chemical base: 1-K Modified Silane Polymer
(MS Polymer)
Colour:  Black
Consistency: Pasteus, very good steadfastness
Shore Hardness (A)
– DIN53505 at +23°C / 50% rH:  
Shore A57 (Thickness 6mm after 4 weeks)
Working temperature: from +5°C to +35°C
Temperature resistance: from -40°C to +90°C
Potlife at +23°C / 50% rH: < 15 Min.
Tack free time at +23°C / 50% rH: 15 Min.
Full through cure – DIN 50014
at +23°C / 50%rF: 3mm / 24 Std.
“Drive away time”: 1 hour
Change of weight – DIN50014: 1% 14 days
Green strength: 600 Pa, electrical current

measure MC100
Brake elongation – DIN 53504: 2,7 MPa
Pull Strenght – DIN 53504: 1,7 MPa
Lap Shear Strenght – DIN 5328: 2,5 MPa
Tear Propagation Strenght – DIN 53515: 16N/mm²
Torsion stiffness: 1,92 MPa (using a Poission ratio
of 0,43)
Elongation – DIN53283:  180%
Module at 100% Elongation - DIN53504 S2
at 7 Days/ +23°C / 50%r:  2,3 MPa
Electrical volume resistivity: 10ˆ11 Ohm cm
Shelf life at 4-22°C / 50% rH: 12 Months. 
Keep cool and dry. Keep away from direct sunlight.

    TECHNO SCREEN MS was specially developed for the bonding of fixed glazing in vehicle repairs. It enables a drive-away time of 1 hour* in vehicles with or without airbags.
    *Provided that the ambient temperature is at least 23°C and the relative humidity is 50%. At lower temperatures and lower humidity, the waiting time will be longer.
    PREPARING THE GLASS: 
    (New windshield) Clean the adhesive surface of the glass (black edge) with Safe Clean and a dry viscose cloth. 
    BODY PREPARATION.
    Cut back the old adhesive residue on the frame of the vehicle to approx. 2 mm using a folding scraper. 
    If there is any damage to the paintwork when the window is removed, this should be repaired with a black primer (observe the flash-off time).
    BONDING:
    Prepare TECHN SCREEN MS (in cartridge or bag form) for bonding (attach V-nozzle and place in cartridge or bag press). Apply a bead of adhesive to the glass ceramic edge using the V-seam nozzle.
    Bond the pane to the vehicle within the open processing time. The vehicle must not be moved for at least one hour afterwards (with or without airbag) depending on the temperature and humidity.