TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia

Techno Finisher

TECHNO FINISHER is a glossy, UV-resistant, fast-drying clear coat that can be applied universally to all existing base coats (solvent-based). Because of its very good flow and ease of polish, TECHNO FINISHER  is highly                            suitable for spot repairs with solvent-based paints. TECHNO FINISHER is ideal for protection of different kind of surfaces: iron, silver, copper, aluminium, bronze, plastic, paint surface, stones, textile, paper, wood, …

  • Fast drying time
  • Easy application
  • Can be used on all solvent-based paints
  • UV resistant
  • Highly suited for spot repairs due to good flow and being easy to polish
  • Prevents against oxidation on stone, iron, copper, brass, aluminium, silver, bronze…
  • Repairs scratches on equipments like ski, ski boots, snowboards, helmets, decoration, displays, letterings…
  • Light blending
  • High gloss
  • TECHNO FINISHER does not discolour or crack, it remains flexible.
T122001Techno Finisher500ml

Form: aerosol
Colour: transparent
Smell: characteristic
Degree of gloss: at measurement angle 60° acc.
DIN 67530, 85 - 90 GE
Efficiency: Depending of consistence and colour
of the substrate, 500 ml are sufficient for approx. 2,0 - 2,5 m²  
Drying (at 20°C, 50% relative air humidity):
Outside powder: after 5 minutes
Touch-dry: after 10 minutes
Overpaintable: after 1 hour
Cured after 24 hours
The drying time is depending on the ambient
temperature, air humidity and the applied
paint layer
Storage stability:
6 years if stored correctly (= 10°C - 25°C, relative humidity max. 60%)
Packaging: Aerosol cans, maximum nominal
volume 500 ml
VOC-Value (Directive 2010/75/EC): 48,40% - 374,49 g/litre
VOC (volatile carbon): 29,24 % - 226,24 g/litre
For professional use only!


  • To avoid the oxidation on metal surfaces like iron, silver, copper, alluminum, bronze…
  • Excellent for protection and waterproofing of hard textiles like camping tents,  boat roofs , car roofs, …
  • To protect wooden surfaces for long time. (waterproof)
  • To renovate and to protect ski, snow board, ski boots ( to repair the scratches) . Use TECHNO FINISHER and it will look like new!
  • TECHNO FINISHER can be used also to protect electric instruments.
  • Transparent varnish for body work, ideal for finishing the existing solvent based paints. Ideal also for internal parts of cars and industrial vehicle like hood, bumpers spoilers etc.
  • It is very useful also for motorcycle which must be polished.
  • Ideal for spot repairs and refinishing parts.
  • USE:
  • The surface must be cleaned, degreased, dry, rust-free. If possibile treat the surface with an anti-silicone solvent.
  • Solvent-based paints can be recoated with TECHNO FINISHER once they have dried for 60 minutes.
  • Shake can for 2 minutes. If necessary, repeat after 10-15 minutes. In order to improve the adhesion, sand the surface with abrasive (grain starting with P400, then 800 and 2000 depending on damage).
  • Carry out spray test.
  • Spray 2-3 thin layers from a distance of 15 - 20 cm and avoid dripping. Between each layer wait some minutes. The application temperature should be 20-25°C.
  • For application on water based paints,
  • please test before use.
  • Do not spray on synthetic resin areas!
  • The best way to prepare the surface to be coated is to clean it with SAFETY CLEAN or MULTIFOAM.