Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Take Off

TAKE OFF is an efficient solution to degrease and clean hardened paints, silicones and MS-Polymers.
It can disolve hardened PU-foam and can be washed off with water to stop the reaction.
TAKE OFF is safe to use even on sensitive surfaces. TAKE OFF contains no abrasives and does not smell.
It is free from legally banned, hazardous ingredients and therefore easy and safe to use.

  • Cleans and degreases hardened paints easily and fast
  • Can remove silikon and MS-Polymeres
  • Dissolves hardened PU-foam
  • Can be washed off with water to stop reaction
  • No SVHC-substances contained
  • Has no hazardous ingredients
  • Is free of danger signs

 
Article nr Name Content
T875003 Spray Master Alkaline 1,5l 1pc.
Y390303 Glove GoGrip NI L 50 pcs.
Y390304 Glove GoGrip NI XL 50 pcs.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: liquid
Colour: colourless/transparent
Odour: characteristic of solvent
pH (at 20 °C): not available
Melting point / freezing point: -65 °C
Initial boiling point: 210 °C
Flash point: 88 °C

Flammability: not available
Lower explosion limit: 0.75 % (v/v)
Upper explosion limit: 38.2 % (v/v)
Ignition temperature: 210 °C
Vapor pressure (temperature 25 °C): 0.22 mBar
Density and/or relative density: 0.9921 

  • APPLICATION and USE:
  • Simply apply the liquid solution with the trigger to the surface to be cleaned, leave to act briefly and wipe off with a paper towel. Repeat if heavily soiled.
  • Proceed as described above to remove silicone- or MS-polymer residues. A scraper can also be used.
  • Apply to hardened PU-foam and wait for a reaction. It dissolves the PU-foam until the affected areas are washed off with water, thus stopping the reaction.
  • FOR INDUSTRIAL AND COMMERCIAL USE ONLY!

Take Off

TAKE OFF is an efficient solution to degrease and clean hardened paints, silicones and MS-Polymers.
It can disolve hardened PU-foam and can be washed off with water to stop the reaction.
TAKE OFF is safe to use even on sensitive surfaces. TAKE OFF contains no abrasives and does not smell.
It is free from legally banned, hazardous ingredients and therefore easy and safe to use.

  • Cleans and degreases hardened paints easily and fast
  • Can remove silikon and MS-Polymeres
  • Dissolves hardened PU-foam
  • Can be washed off with water to stop reaction
  • No SVHC-substances contained
  • Has no hazardous ingredients
  • Is free of danger signs

 
Article nr Name Content
T875003 Spray Master Alkaline 1,5l 1pc.
Y390303 Glove GoGrip NI L 50 pcs.
Y390304 Glove GoGrip NI XL 50 pcs.

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: liquid
Colour: colourless/transparent
Odour: characteristic of solvent
pH (at 20 °C): not available
Melting point / freezing point: -65 °C
Initial boiling point: 210 °C
Flash point: 88 °C

Flammability: not available
Lower explosion limit: 0.75 % (v/v)
Upper explosion limit: 38.2 % (v/v)
Ignition temperature: 210 °C
Vapor pressure (temperature 25 °C): 0.22 mBar
Density and/or relative density: 0.9921 

  • APPLICATION and USE:
  • Simply apply the liquid solution with the trigger to the surface to be cleaned, leave to act briefly and wipe off with a paper towel. Repeat if heavily soiled.
  • Proceed as described above to remove silicone- or MS-polymer residues. A scraper can also be used.
  • Apply to hardened PU-foam and wait for a reaction. It dissolves the PU-foam until the affected areas are washed off with water, thus stopping the reaction.
  • FOR INDUSTRIAL AND COMMERCIAL USE ONLY!