Region:
TECH-MASTERS GroupChanging region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Supersolv

SUPERSOLV is a non-flammable, fast drying industrial degreaser that leaves no residues. The jet spray simplifies to apply difficult to reach areas. Safe and economical in use thanks its non-flammable properties and the self evaporation. SUPERSOLV clean metal parts, glass, ceramics, most of plastics from oil, grease, carbon and soiling residues.

  • Extremely powerful
  • High pressure jet spray
  • Evaporates instantaneously.
  • Leaves no residues
  • Non-flammable
  • Safe to use on electric and electronic equipment connected to a power source.
  • High effective cleaning and degreasing
Article nrNameContent
T498001Supersolv562ml

  • Technical data
  • Application and usage
  • Downloads

Appearance: liquid
Colour: yellow/ transparent
Odour: citrus
Boiling point: 40°C
Lower explosion limit: 13% (V)
Upper explosion limit: 22% (V)
Density (at 20°C): 1,3
Water solubility: partially soluble
Partition coefficient: n-octanol/water: 1,25
Melting point: -97°C
Self-ignition temperature: 605°C
VOC: 100%
Flash point: none
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

Apperance: aerosol
Colour: yellow/ transparent
Odour: citrus
Density (aerosol) at 20° C: 1,3 (ASTM D 4052)
Water solubility: insoluble
VOC: 100%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

  • Application: Cleaning of car and truck engines, use on boilers and burners, dissolves carbon deposits on carburettors, valves, waterwork  sliders, pumps and machine casings, dissolves ink, cleaning of printing equipment and electromechanical parts. SUPERSOLV dissolves standard oils, grease and tar. Cleaning surfaces of all parts that need to be clean and dry immediately!
  • Use as aerosol: Spray and allow product to work for a few seconds. Repeat if necessary on stubborn dirt or stains.
    It´s highly recommended, to test the product before applying to plastics, paints and synthetic materials.
  • Use as liquid: Apply with a cloth or in a bath. This solvent is not compatible with degreasing part washers!
     

Supersolv

SUPERSOLV is a non-flammable, fast drying industrial degreaser that leaves no residues. The jet spray simplifies to apply difficult to reach areas. Safe and economical in use thanks its non-flammable properties and the self evaporation. SUPERSOLV clean metal parts, glass, ceramics, most of plastics from oil, grease, carbon and soiling residues.

  • Extremely powerful
  • High pressure jet spray
  • Evaporates instantaneously.
  • Leaves no residues
  • Non-flammable
  • Safe to use on electric and electronic equipment connected to a power source.
  • High effective cleaning and degreasing
Article nrNameContent
T498001Supersolv562ml

  • Technical data
  • Application and usage
  • Downloads

Appearance: liquid
Colour: yellow/ transparent
Odour: citrus
Boiling point: 40°C
Lower explosion limit: 13% (V)
Upper explosion limit: 22% (V)
Density (at 20°C): 1,3
Water solubility: partially soluble
Partition coefficient: n-octanol/water: 1,25
Melting point: -97°C
Self-ignition temperature: 605°C
VOC: 100%
Flash point: none
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

Apperance: aerosol
Colour: yellow/ transparent
Odour: citrus
Density (aerosol) at 20° C: 1,3 (ASTM D 4052)
Water solubility: insoluble
VOC: 100%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

  • Application: Cleaning of car and truck engines, use on boilers and burners, dissolves carbon deposits on carburettors, valves, waterwork  sliders, pumps and machine casings, dissolves ink, cleaning of printing equipment and electromechanical parts. SUPERSOLV dissolves standard oils, grease and tar. Cleaning surfaces of all parts that need to be clean and dry immediately!
  • Use as aerosol: Spray and allow product to work for a few seconds. Repeat if necessary on stubborn dirt or stains.
    It´s highly recommended, to test the product before applying to plastics, paints and synthetic materials.
  • Use as liquid: Apply with a cloth or in a bath. This solvent is not compatible with degreasing part washers!