Region:
TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Sealtape

SEALTAPE is the most versatil repair tape for
emergencies and all-purpose repairs. Just by
stretching and wrapping it around an object onto itself, it will quickly and easily create a permanent airtight, waterproof seal in just seconds! It can even be used on dirty and wet surfaces. It will remain flexible and not become brittle after being exposed to sunlight.  SEALTAPE is easy to remove and leaves no residues.

  • UV-resistant.
  • Permanent waterproof - airtight.
  • Usable under water.
  • Resist fuels, oil, acids, solvents and salt.
  • Flexible up to 300%
  • Pressure resistant up to 8 bar.
  • Insulates 8.000 Volts.
  • Temperature resistance from - 65° C to + 260° C.
Article nrNameContent
T556101Sealtape black1 pc.
T556121Sealtape green1 pc.
T556201Sealtape white1 pc.
T556301Seal Tape blue1 pc.
T556601Sealtape transparent1 pc.
T556701Sealtape red1 pc.
T556801Sealtape yellow1 pc.

Colour:  transparent; coloured
Temperature range: - 65°C to + 260°C
Brittle point: - 65°C (ASTM D-2137)
Flash point:  260°C
Hardness: 50 Shore A
Realtive density: 1.15

Tensile strength: 700psi (ASTM D-412)
Elongation at tear: 300% (ASTM D-412)
Pressure resistance: 10 Bar (maximum)
Shelf life: 12 month
Safety measures: Consult the Safety Data Sheet

  • SEALTAPE saves time and money by securing, protecting or repairing almost anything,, everwhere and in any condition.
    Use it on electrical wires as shrink-tube, protect tool handles, connectors, fittings. For cable bundling and rope-end protection, anti slip coatings, safety and color-marking etc.
    It is perfect for boats, cars, trucks, caravans/campers, aircrafts, agriculture industry, plumbing, military, general industry, rescue teams.
  • Use:
    Unwind SEALTAPE and remove the plastic liner from tape.
    Wrap SEALTAPE around the object by stretching and overlapping one layer. Press for good bonding. For high pressure leaks stretch to maximum (at least 300 %). The tighter the tape is wrapped, the quicker and stronger it will fuse.