Menu
Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
+43 7242 9396 1650
« ADHESIVES AND SEALANTS

Seal & Lock

SEAL & LOCK is a universal medium strength and thixotropic anaerobic adhesive and sealant, which may be used as threadlocker or fastener for stud bolts, and to bond ball and roller bearings into housings or tooth wheels on axles. This grade may be used also as pipe und flange sealant and seals most common threaded pipe connectors. SEAL & LOCK cures even at lower temperatures (> 0°C). The practical pressurized can of 50ml allows to apply it easily and very precise in 360° position. Certified acc. to DVGW (DIN EN 751-1) and to ANSI/NSF Standard 61 for use in commercial and residential potable water systems not exceeding +82°C.

  • Universal anaerobic bonding and sealing
  • Threadlocking, Pipe sealing, Flange sealing and Retaining in one product
  • Perfect dosing even upside down
  • Perfect adjusting time
  • No hazard signs
  • Temperature resistance from -55°C up to +150°C
  • In practical pressurized can
  • NSF / DVGW Registered
Article nr Name Content
T560001 Anaerobic Activator 100ml 100ml
T567005 Seal & Lock 50ml 50ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Liquid
Colour: yellow
Odour: mild
pH (20 °C):  6 – 7
Flash point: > 100 °C
Viscosity: 18000 – 30000 mPas 6/ 20
Density (at 25°C): 1.05 g/cm³
Max. thread diameter: 3 inches (M 80)
Max. gap filling: 0.50mm
Flash point: > 100°C

Physical Properties (cured product)
Initial strength after: 15 - 30 minutes
Functional strength after: 1 - 3 hours
Final strength after: 3 - 6 hours
Loose-break torque: 10 - 20 Nm (M10),
DIN EN 15865
Prevailing torque: 10 - 15 Nm (M10)
Shear strength: 6 – 13 N/mm²  (DIN EN 15337)
Free of non-ferrous metals.
Thermal range: - 55°C up to +150°C

  • ATTENTION:
    The use of SEAL & LOCK  is not recommended for  threads, cut in copper or copper alloys, which have contact with hot water (>40°C), without any preliminary testing.
    In Germany not allowed for use in household gas-installations acc. to TRGI ´86/96.
  • Threadlocking, Pipe sealing, Flange sealing, Retaining.


    •  
pdf Product Information
techmasters_en_sel_PDS.pdftechmasters_en_sel_PDS.pdf (3.0 MB)
pdf DVGW Certificate DE/EN
techmasters_en_sel_DVGW Certificate_Seal & Lock_170826_INFO.pdftechmasters_en_...170826_INFO.pdf (486.6 KB)
pdf MSDS T567005 Seal & Lock 50ml V2
MSDS_T567005_Seal_Lock_50ml_T567005_V2_en_AT.pdfMSDS_T567005_Se...05_V2_en_AT.pdf (303.0 KB)

Seal & Lock

SEAL & LOCK is a universal medium strength and thixotropic anaerobic adhesive and sealant, which may be used as threadlocker or fastener for stud bolts, and to bond ball and roller bearings into housings or tooth wheels on axles. This grade may be used also as pipe und flange sealant and seals most common threaded pipe connectors. SEAL & LOCK cures even at lower temperatures (> 0°C). The practical pressurized can of 50ml allows to apply it easily and very precise in 360° position. Certified acc. to DVGW (DIN EN 751-1) and to ANSI/NSF Standard 61 for use in commercial and residential potable water systems not exceeding +82°C.

  • Universal anaerobic bonding and sealing
  • Threadlocking, Pipe sealing, Flange sealing and Retaining in one product
  • Perfect dosing even upside down
  • Perfect adjusting time
  • No hazard signs
  • Temperature resistance from -55°C up to +150°C
  • In practical pressurized can
  • NSF / DVGW Registered
Article nr Name Content
T560001 Anaerobic Activator 100ml 100ml
T567005 Seal & Lock 50ml 50ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Liquid
Colour: yellow
Odour: mild
pH (20 °C):  6 – 7
Flash point: > 100 °C
Viscosity: 18000 – 30000 mPas 6/ 20
Density (at 25°C): 1.05 g/cm³
Max. thread diameter: 3 inches (M 80)
Max. gap filling: 0.50mm
Flash point: > 100°C

Physical Properties (cured product)
Initial strength after: 15 - 30 minutes
Functional strength after: 1 - 3 hours
Final strength after: 3 - 6 hours
Loose-break torque: 10 - 20 Nm (M10),
DIN EN 15865
Prevailing torque: 10 - 15 Nm (M10)
Shear strength: 6 – 13 N/mm²  (DIN EN 15337)
Free of non-ferrous metals.
Thermal range: - 55°C up to +150°C

  • ATTENTION:
    The use of SEAL & LOCK  is not recommended for  threads, cut in copper or copper alloys, which have contact with hot water (>40°C), without any preliminary testing.
    In Germany not allowed for use in household gas-installations acc. to TRGI ´86/96.
  • Threadlocking, Pipe sealing, Flange sealing, Retaining.


    •  
pdf Product Information
techmasters_en_sel_PDS.pdftechmasters_en_sel_PDS.pdf (3.0 MB)
pdf DVGW Certificate DE/EN
techmasters_en_sel_DVGW Certificate_Seal & Lock_170826_INFO.pdftechmasters_en_...170826_INFO.pdf (486.6 KB)
pdf MSDS T567005 Seal & Lock 50ml V2
MSDS_T567005_Seal_Lock_50ml_T567005_V2_en_AT.pdfMSDS_T567005_Se...05_V2_en_AT.pdf (303.0 KB)
1. Choose location
TECH-MASTERS Group
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
2. Cookies

We use our own and third-party cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. The cookies are described in more detail under "Cookie Settings" and can be activated or deactivated. By clicking on "Allow all cookies" you agree to their use. You can subsequently change your cookie settings on the "Privacy Policy" page. Additional Information:  Privacy policy incl. cookie settings | General terms and conditions

Accept cookies

Cookie Settings

×
  • What are cookies?
  • Required Cookies
  • Performance Cookies
  • Marketing Cookies

What are cookies?

Cookies are text files that are stored by a browser on the end device to store certain information. With this information, our website recognizes that you have already visited it. We use this to prepare the information accordingly. Your personal data will not be saved.

Required Cookies

These cookies control functions without which our website cannot be used to its full extent. These cookies are only used by us (our own cookies). As a result, this information is only used and processed by our website. For example, you don't have to log in again every time you log in.

Performance Cookies

“Google Analytics” and “Google Tag Manager” are used to collect information on how our website is used. These cookies help us, for example, to determine whether and which sub-pages of our website are visited and what content the users are interested in. We primarily record the number of visits and their duration. Note on data processing in the USA: According to the case law of the European Court of Justice (judgement of July 16, 2020, case ref.: C-311/18 (“Schrems II”)) no adequate level of data protection exists in the USA. In addition, government surveillance measures in the USA may result where no adequate legal protection can be sought against these measures. In particular, US security and secret services may have access to your data without you being informed and without you being able to take legal action against it. The data processing in the USA in connection with the data processed by Tech-Masters Trading GmbH is based on your consent in the sense of Art. 49 para. 1 lit a) in conjunction with Art. 6 para. 1 lit a) GDPR. You can revoke your consent at any time non-retroactively. Understanding the above information on data protection in the USA, I also consent to the processing of personal data in the USA if and to the extent that I give my consent to the use of cookies via configuration of the cookie settings. I may revoke my consent at any time non-retroactively.

Marketing Cookies

We show "Youtube" videos for some products. This marketing cookie comes from Google and collects information about the websites visited by the user in order to create targeted advertising for the visitor. In this context, we do not process any personal data without your consent in accordance with Article 6 (1) (a) GDPR.