Rustcon Aerosol
RUSTCON AEROSOL is an innovative new chemical formula that actually transforms un-wanted rust into a tough, black-glass rust resistant polymer finish.
Region:
TECH-MASTERS Group
Changing region
TECH-MASTERS Group
Changing region
-
TECH-MASTERS Austria
-
TECH-MASTERS Germany
-
TECH-MASTERS Croatia
-
TECH-MASTERS Czech
-
TECH-MASTERS Poland
-
TECH-MASTERS Slovakia
-
TECH-MASTERS Hungary
-
TECH-MASTERS Romania
-
TECH-MASTERS Slovenia
-
TECH-MASTERS Italia
-
TECH-MASTERS Group
- Chemically neutralizes rust.
- Leaves a tough, long term rust preventative coating.
- Seals, protects and prolongs the life of ferrous metals.
- Turns rusted area to a black protective finish.
- The protective barrier, upon curing, can be painted if desired.
- Can be overpainted.
| Article nr | Name | Content |
|---|---|---|
| T181001 | Rustcon Aerosol 500ml | 500ml |
» To the shop
Type: polymeric, air cured coating
Form: aerosol
Colour: light brown
Odour: characteristic
Flash point: -42°C
Boiling point: -24,8°C
Auto-ignition temperature: 235°C
Lower explosion limit: 1,1 Vol%
Upper explosion limit: 20,0 Vol%
Vapour pressure (at 20°C): 5200 hPa
Density (at 20°C): 0,797 g/cm³
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Store cool and dry
Safety measures: consult the Safety Data Sheet
- Surface Preparation:
Surfaces must be clean, dry and free of grease, dirt and oil. Remove loose rust and paint with coarse sand paper or wire brush. - Shake RUSTCON AEROSOL well for at least one minute before using.
- Apply when work piece and can are at temperature of 8-25°C.
- Holding can 20 to 30 cm from the surface, spray a thin, even coating of RUSTCON AEROSOL onto the rusted metal. Spray 2-3 layers "wet in wet" without sagging.
- Let the layer convert and dry.
- Final application will dry to a black finish.
- Maybe painted after curing for approximately six hours.
Rustcon Aerosol
RUSTCON AEROSOL is an innovative new chemical formula that actually transforms un-wanted rust into a tough, black-glass rust resistant polymer finish.
- Chemically neutralizes rust.
- Leaves a tough, long term rust preventative coating.
- Seals, protects and prolongs the life of ferrous metals.
- Turns rusted area to a black protective finish.
- The protective barrier, upon curing, can be painted if desired.
- Can be overpainted.
| Article nr | Name | Content |
|---|---|---|
| T181001 | Rustcon Aerosol 500ml | 500ml |
» To the shop
Type: polymeric, air cured coating
Form: aerosol
Colour: light brown
Odour: characteristic
Flash point: -42°C
Boiling point: -24,8°C
Auto-ignition temperature: 235°C
Lower explosion limit: 1,1 Vol%
Upper explosion limit: 20,0 Vol%
Vapour pressure (at 20°C): 5200 hPa
Density (at 20°C): 0,797 g/cm³
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Store cool and dry
Safety measures: consult the Safety Data Sheet
- Surface Preparation:
Surfaces must be clean, dry and free of grease, dirt and oil. Remove loose rust and paint with coarse sand paper or wire brush. - Shake RUSTCON AEROSOL well for at least one minute before using.
- Apply when work piece and can are at temperature of 8-25°C.
- Holding can 20 to 30 cm from the surface, spray a thin, even coating of RUSTCON AEROSOL onto the rusted metal. Spray 2-3 layers "wet in wet" without sagging.
- Let the layer convert and dry.
- Final application will dry to a black finish.
- Maybe painted after curing for approximately six hours.