Region:
TECH-MASTERS Group Changing region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Leak Detect Pro

LEAK DETECT PRO detects all kinds of air and gas leaks in a few seconds. LEAK DETECT PRO has a good adhesion to hoses and tubes. Thanks to its design LEAK DETECT PRO is easy to use in small places. LEAK DETECT PRO is a reliable and safe leak detector. LEAK DETECT PRO is non-corrosive, nor toxic and does not leave any pollution.

  • DIN-DVGW certified
  • Detects air and gas leaks in a few seconds.
  • Non-corrosive, safe to use on all surfaces.
  • Colourless and non-toxic.
  • Extremely long working time.
  • Applicable in spaces that are hard to reach.
  • Economically, safe and easy to use.
Article nr Name Content
T163002 Leak Detect Pro 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: various
Odour: characteristic
pH-value (at 20°C): 7-8
Initial boiling point: 100°C
Flash point: 104°C
Auto-ignition temperature: 371°C
Upper/lower flammability or explosive limits: 2.6 – 12.6 Vol-%

Vapour pressure (at 20°C): 23 hPa
Density (at 20°C): 1,017 g/cm³
Water solubility: completely miscible
Dynamic viscosity (at 20°C): 0 mPas
Can be removed with: warm water - acetone - methanol.
Corrosive: non-corrosive, non-toxic.
Application temperature: from -20°C to +35°C.

  • to check and after repair of gas units, compressed air lines, flat tyres, pressure vessel hoses, braking systems on air
    pressure, ...
  • testing gas pressure on pressure tanks
  • cooling units, air-conditioning
  • welding joints
  • compressors
  • screwed tube joints
  • valves, transport of liquid gas
  • pipe systems

Leak Detect Pro

LEAK DETECT PRO detects all kinds of air and gas leaks in a few seconds. LEAK DETECT PRO has a good adhesion to hoses and tubes. Thanks to its design LEAK DETECT PRO is easy to use in small places. LEAK DETECT PRO is a reliable and safe leak detector. LEAK DETECT PRO is non-corrosive, nor toxic and does not leave any pollution.

  • DIN-DVGW certified
  • Detects air and gas leaks in a few seconds.
  • Non-corrosive, safe to use on all surfaces.
  • Colourless and non-toxic.
  • Extremely long working time.
  • Applicable in spaces that are hard to reach.
  • Economically, safe and easy to use.
Article nr Name Content
T163002 Leak Detect Pro 500ml 500ml

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: Aerosol
Colour: various
Odour: characteristic
pH-value (at 20°C): 7-8
Initial boiling point: 100°C
Flash point: 104°C
Auto-ignition temperature: 371°C
Upper/lower flammability or explosive limits: 2.6 – 12.6 Vol-%

Vapour pressure (at 20°C): 23 hPa
Density (at 20°C): 1,017 g/cm³
Water solubility: completely miscible
Dynamic viscosity (at 20°C): 0 mPas
Can be removed with: warm water - acetone - methanol.
Corrosive: non-corrosive, non-toxic.
Application temperature: from -20°C to +35°C.

  • to check and after repair of gas units, compressed air lines, flat tyres, pressure vessel hoses, braking systems on air
    pressure, ...
  • testing gas pressure on pressure tanks
  • cooling units, air-conditioning
  • welding joints
  • compressors
  • screwed tube joints
  • valves, transport of liquid gas
  • pipe systems