Keramic Spray/Paste

Product variant for

General «

General

Automotive

KERAMIC SPRAY is a high quality, metal free and extreme heat resistant high pressure resistant lubricating, separating and anti-corrosion paste. KERAMIC SPRAY is a high-quality, durable ceramic fat been developed specifically for applications where high pressure and temperature resistance is required.

Excellent for low and high temperature applications
Does not melt away due its unique composition
High pressure durability, high corrosion prevention
Prevents seizing and galling of highly stressed parts
Extreme long-term lubricating effect even in hot steam exposure
Free of silicone and metal components, replacing copper sprays
Insulating coating between components
Reduces squeaking noises without disturbing ABS sensors

Article nr	Name	Content
T920001	Keramic Spray 500ml	500ml
T920002	Keramic Paste PP 200ml	200ml

» To the shop

Technical data
Application and usage
Downloads

SPRAY:
Form: aerosol
Odour: characteristic
Temperature range: -40°C to +1000°C
Boiling point: -44,5°C
Flash point: -97°C
Ignition temperature: > 200°C
Upper/lower flammability or explosive limits: 0.8 – 10.9 Vol-%
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Dynamic viscosity:
7500 - 10500 Brookfield sp3 6 rpm
4000 - 6000 Brookfield sp3 12 rpm
Vapour pressure (at 20°C): 5100 hPa
Density (at 20°C): 0,658 g/cm³
Organic solvents: 75%
Solids content: 24,4%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

PASTE PP:
Form: paste
Colour: white
Odour: characteristic
Temperature stability: very good
Temperature range: -20°C to +150°C, ceramic components up to +1400°C
Density (at 20°C): 1,2 - 1,3 g/cm³
NLGI-grade: 2
Solids content:42 - 43%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

INDUSTRY:
Particularly suitable for assembly and disassembly of tension springs, etc., and at the test pressure in the tank construction, ball valves, sliding guides, spindles, worm gears, wheels, bolts, cutting tools.
For lubrication of leaf springs, chains, hinges, metal bearings, garages and gates, building and garden equipment, escalators, Elevators, heating parts and flaps, etc...
AUTOMOTIVE:
For lubricating hinges, axle joints, leaf springs, wheel bolts, wheel hubs, exhaust systems, turbochargers, clutch thrust bearings, brake calipers, brake systems, Engine and machine parts, bearings, bolts, door check straps corrosion prevention in contact with aluminum rims, etc...
USE:
Surface should be dry and clean, old lubricant residues should be removed by TECHNO SOLV ECO, SAFETY CLEAN, OR CLEAN SPRAY.

SPRAY: Shake the can well before use and apply the treated parts from a distance of 20 to 30 cm with a thin layer. Do not spray onto brake disks!

PASTE Press Pack: set the applicator included in the package, apply the product on the desired area, remove the nozzle and spread the product the brush.

pdf Product Information
techmasters_en_kks_PDS.pdftechmasters_en_kks_PDS.pdf (4.4 MB)

pdf MSDS T920002 Keramic Paste PP 200ml V1
MSDS_T920002_Keramic_Paste_PP_200ml_T920002_V1_en_AT.pdfMSDS_T920002_Ke...02_V1_en_AT.pdf (311.8 KB)

pdf MSDS T920001 Keramic Spray 500ml V1
MSDS_T920001_Keramic_Spray_500ml_T920001_V1_en_AT.pdfMSDS_T920001_Ke...01_V1_en_AT.pdf (374.4 KB)

Keramic Spray/Paste

Product variant for

«

General

Automotive

Article nr	Name	Content
T920001	Keramic Spray 500ml	500ml
T920002	Keramic Paste PP 200ml	200ml

» To the shop

Application and usage
Downloads

pdf Product Information
techmasters_en_kks_PDS.pdftechmasters_en_kks_PDS.pdf (9.3 MB)

pdf MSDS T920002 Keramic Paste PP 200ml V1
MSDS_T920002_Keramic_Paste_PP_200ml_T920002_V1_en_AT.pdfMSDS_T920002_Ke...02_V1_en_AT.pdf (311.8 KB)

pdf MSDS T920001 Keramic Spray 500ml V1
MSDS_T920001_Keramic_Spray_500ml_T920001_V1_en_AT.pdfMSDS_T920001_Ke...01_V1_en_AT.pdf (374.4 KB)

Keramic Spray/Paste

Product variant for

«

General

Automotive

KERAMIC SPRAY is a high quality, metal free and extreme heat resistant high pressure resistant lubricating, separating and anti-corrosion paste. KERAMIC SPRAY is a high-quality, durable ceramic fat been developed specifically for applications where high pressure and temperature resistance is required.

Excellent for low and high temperature applications
Does not melt away due its unique composition
High pressure durability, high corrosion prevention
Prevents seizing and galling of highly stressed parts
Extreme long-term lubricating effect even in hot steam exposure
Free of silicone and metal components, replacing copper sprays
Insulating coating between components
Reduces squeaking noises without disturbing ABS sensors

Article nr	Name	Content
T920001	Keramic Spray 500ml	500ml
T920002	Keramic Paste PP 200ml	200ml

» To the shop

Technical data
Application and usage
Downloads

SPRAY:
Form: aerosol
Odour: characteristic
Temperature range: -40°C to +1000°C
Boiling point: -44,5°C
Flash point: -97°C
Ignition temperature: > 200°C
Upper/lower flammability or explosive limits: 0.8 – 10.9 Vol-%
Kinematic viscosity (at 40°C): ≤ 20,5 mm²/s
Dynamic viscosity:
7500 - 10500 Brookfield sp3 6 rpm
4000 - 6000 Brookfield sp3 12 rpm
Vapour pressure (at 20°C): 5100 hPa
Density (at 20°C): 0,658 g/cm³
Organic solvents: 75%
Solids content: 24,4%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

PASTE PP:
Form: paste
Colour: white
Odour: characteristic
Temperature stability: very good
Temperature range: -20°C to +150°C, ceramic components up to +1400°C
Density (at 20°C): 1,2 - 1,3 g/cm³
NLGI-grade: 2
Solids content:42 - 43%
Shelf life: 12 months
Safety measures: Consult the Safety Data Sheet

INDUSTRY:
Particularly suitable for assembly and disassembly of tension springs, etc., and at the test pressure in the tank construction, ball valves, sliding guides, spindles, worm gears, wheels, bolts, cutting tools.
For lubrication of leaf springs, chains, hinges, metal bearings, garages and gates, building and garden equipment, escalators, Elevators, heating parts and flaps, etc...
AUTOMOTIVE:
For lubricating hinges, axle joints, leaf springs, wheel bolts, wheel hubs, exhaust systems, turbochargers, clutch thrust bearings, brake calipers, brake systems, Engine and machine parts, bearings, bolts, door check straps corrosion prevention in contact with aluminum rims, etc...
USE:
Surface should be dry and clean, old lubricant residues should be removed by TECHNO SOLV ECO, SAFETY CLEAN, OR CLEAN SPRAY.

SPRAY: Shake the can well before use and apply the treated parts from a distance of 20 to 30 cm with a thin layer. Do not spray onto brake disks!

PASTE Press Pack: set the applicator included in the package, apply the product on the desired area, remove the nozzle and spread the product the brush.