Region:
TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Fix Tape

FIX TAPE is a general purpose duct tape with strong inital tack and a good adhesive power. FIX TAPE is suitable for any adhesion on smooth or rough surfaces such as stainless steel, glass, wood or polyethylene. FIX TAPE can be used for repairing and construction work, etc.  

  • Strong initial tack
  • Good adhesive power
  • Extremely wear-resistant against abrasion
  • Superb resistance to tape curl
  • Due to high tack adhesive it adheres to a wide variety of substrates
  • Easy to apply and hand tears in rectangular lines
  • Moisture resistant and does not absorb water
  • Easy to write on
Article nrNameContent
T581301Fix Tape Silver 48mm x 50m1 pc.

Adhesive: hot melt/synthetic rubber
Base material (Carrier): PE coated fabric
Colour: silver
Odour: Slight rubber odour
Specific gravity: 0,98 g/cm³
Melting point: > 130°C
Vapour resistance: Essentially non-volatile

Solubility in water (20°C): Negligible
Adhesion to steel: 20 N / 25 mm
Tensile strength: 75 N / 25 mm
Thickness: 0,17 mm
Temperature range: -10°C to +75°C (short term)
Store clean and dry in a well ventilated area at a temperature between +10°C and +30°C.

  • APPLICATION
  • Automotive, aerospace, military, general industrial, MRO, facilities management, transportation, marine, commercial vehicle, RV, bus, truck, ship yards, metal working, furniture, electronics, solar, trailer manufacturing and woodworking
  • Lane marking, floor marking, safety coding, hazard marking, identifying, sealing, color coding, bundling, holding, reinforcing, identifying, tabbing, wrapping, splicing and protecting
  • USE
  • Temperature: between -5°C and +35°C. Surface must be clean and free from dust and grease. Avoid touching the tapes exposed adhesive surface in order to keep full adhesive performance. Pressure sensitive adhesive must be applied with a maximum of pressure in order to achieve maximum pressure level. The indicated level of performance will be reached after a bonding period of 24h at +23°C