TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia

Drain Clean

DRAIN CLEAN is a biodegradable product, with clears and maintains all blocked drains rapid and effective without damaging the tubes or fittings.  Because of the very high specific weight DRAIN CLEAN penetrates immediately through the waste water and restores drains to full flow very fast. It removes lime, urine stone, soap, grease, hair, protein deposits, compounds of cellulose, panty liners, tampons and all organic residues. DRAIN CLEAN  does not damage plastics, rubber, steel, metal, lead, or PVC piping or surfaces. To use in all situations of blocked pipes and to maintain pipes.

  • Dissolves blockage quick and efficient in 3 to 5minutes
  • Very high specific weight
  • Penetrates through the wastewater
  • Restores drains to full flow
  • Will not damage drains, pipes, fittings and other materials
  • It is biodegradable.
  • DRAIN CLEAN removes lime, urine stone, soap, grease, hair, protein deposits, compounds of cellulose,  tampons and all organic residues.
D492002Demo-Kit Filling Tube1
T492000Drain Clean750ml

Appearance: dense liquid
Colour: brown
Odour: characteristic
Initial boiling point: 300°C
Relative density: 1,83
Solubility: soluble in water
Specific weight:1,80
Acting time: 3-5 min.
Biodegradable: after 25min neutralized
Concentration: 95% of sulphuric acid
Closing: Cap Child resistant
CAUTION: The product can leave residues or
causing damages on magnesium, stainless steel
and zinc alloys, Acrylic / Fiberglass, ABS (Acrylic
Butadien Styrol), PMMA (Polymetacrylat).
Please use the filling and sealing tube.
Safety: Do not lean over the drain when using the
Product. Use only in well ventilated areas
Safety measures: consult the Safety Data Sheet.

  • DRAIN CLEAN can be used in showers, floor drains, bathtubs, sinks, Urinals, X-Ray sinks.
  • For a blocked drain, remove all excess water and ensure to handle the product with rubber gloves. Pour the product slowly in the blocked pipe and add half litre of water after 30 seconds. Allow to react for about 5 minutes. Then rinse with water. If necessary repeat the process.  
  • Use only in well ventilated areas.
  • NOTE:  Never apply, if other chemical substances are present. Do not pour directly on aluminum, galvanized, chromed parts, magnesium and acryl. Note: in the presence of this materials pour out Drain Clean with the help of our filling tube incl. gasket (D492002) and a plastic hopper.
  • Dosage of the product
  • Pipe size small:
  • Amount 250 -500 ml / Reaction time  2-3 minutes / Rinse with water for 1-2 min.
  • Pipe size 3" - 4":
  • Amount 500 -750 ml / Reaction time 3-5  minutes / Rinse with water for 3 min.
  • Pipe size 6" - 8":
  • Amount 750 -1000 ml / Reaction time 5-10 minutes / Rinse with water for 5 min.