Confix

Product variant for

General «

General

Automotive

CONFIX is the ideal product for bonding and assembly needs. Providing an extremely fast and strong permanent bond under extreme conditions, either in the handcraft or industrial applications. CONFIX provides an excellent adhesion on different wood products and construction materials, ceramic, metals, thermosetting and thermoplastic materials and meets the highest strain group DIN D4 when bonding wood on wood. CONFIX is a particularly strong assemble adhesive that gives the possibility to realize a permanent bonding with functionality and very high strength.

Fast an controlled hardening
Wide adhesion spectrum on many materials
Easy handling
Very high bonding power
Odorless
Gap filling properties
Permanent elastic
Can be sanded and painted
High weather resistance
Heat resistant up to +80°C

Article nr	Name	Content
T901000	Confix 310ml	310ml

Technical data
Application and usage
Downloads

Aggregate State: pasty
Material: Modified polyurethane
Colour: beige
Odour: characteristic
Flash point: 229 °C
Auto-ignition temperature: 400 °C
Density: 1,46 g/cm³ (20 °C)
Water solubility: Immiscible
Dynamic viscosity: 624 Pa* s (20 °C)
Volume reduction after full hardening: 0%
Tensile strenght: Timber: 10.0 N/mm², Stone or brick: 11.5 N/mm², Aluminium: 14.0 N/mm²

Thermal stability: -30°C to 80°C
Consumption: 400 gr/m²
Application temperature: +5°C to + 35°C
Application:
Assembly time: 5 minutes, 10 minutes 80 % cured
45 minutes 100 % cured under normal conditions
Shelf life: 12 month
Safety Measures: Consult the Safety datasheet

The surfaces of the substrates to be bonded must be dry, free from dust and grease. Remove possible parting compounds.
Put parts to be bonded together befor CONFIX starts skinning. If needed, press together until functional hardness is obtainded.
CONFIX slightly foams during the setting process. Not hardened up CONFIX is cleanded with cleaning towels. Hardened adhesive just can be grinded or sandblasted and painted.
NOTE:
The viscosity of 1-part polyurethane adhesives is twice as high while processing at +15°C as at +25°C

The adhesive changes ist colour, if it is exposed to the sun. The bonding strenght does not change!
Bonding of aluminium: Only possible on chemically pre-treated or painted surfaces. Blank aluminium can only be bonded with a suitable pre-treatment or a primer.
Bonding of materials with different linear expansion must be evaluated regarding their long-time performance!

pdf Product Information
techmasters_en_cvx_PDS.pdftechmasters_en_cvx_PDS.pdf (7.8 MB)

pdf MSDS T901000 Confix 310ml V2
MSDS_T901000_Confix_310ml_T901000_V2_en_AT.pdfMSDS_T901000_Co...00_V2_en_AT.pdf (370.1 KB)

Confix

Product variant for

«

General

Automotive

CONFIX is the ideal product for bonding and assembly needs. Providing an extremely fast and strong permanent bond under extreme conditions, either in the handcraft or industrial applications. CONFIX provides an excellent adhesion on different wood products and construction materials, ceramic, metals, thermosetting and thermoplastic materials and meets the highest strain group DIN D4 when bonding wood on wood. CONFIX is a particularly strong assemble adhesive that gives the possibility to realize a permanent bonding with functionality and very high strength.

Fast an controlled hardening
Wide adhesion spectrum on many materials
Easy handling
Very high bonding power
Odorless
Gap filling properties
Permanent elastic
Can be sanded and painted
High weather resistance
Heat resistant up to +80°C

Article nr	Name	Content
T901000	Confix 310ml	310ml

Technical data
Application and usage
Downloads

Aggregate State: pasty
Material: Modified polyurethane
Colour: beige
Odour: characteristic
Flash point: 229 °C
Auto-ignition temperature: 400 °C
Density: 1,46 g/cm³ (20 °C)
Water solubility: Immiscible
Dynamic viscosity: 624 Pa* s (20 °C)
Volume reduction after full hardening: 0%
Tensile strenght: Timber: 10.0 N/mm², Stone or brick: 11.5 N/mm², Aluminium: 14.0 N/mm²

Thermal stability: -30°C to 80°C
Consumption: 400 gr/m²
Application temperature: +5°C to + 35°C
Application:
Assembly time: 5 minutes, 10 minutes 80 % cured
45 minutes 100 % cured under normal conditions
Shelf life: 12 month
Safety Measures: Consult the Safety datasheet

The surfaces of the substrates to be bonded must be dry, free from dust and grease. Remove possible parting compounds.
Put parts to be bonded together befor CONFIX starts skinning. If needed, press together until functional hardness is obtainded.
CONFIX slightly foams during the setting process. Not hardened up CONFIX is cleanded with cleaning towels. Hardened adhesive just can be grinded or sandblasted and painted.
NOTE:
The viscosity of 1-part polyurethane adhesives is twice as high while processing at +15°C as at +25°C

The adhesive changes ist colour, if it is exposed to the sun. The bonding strenght does not change!
Bonding of aluminium: Only possible on chemically pre-treated or painted surfaces. Blank aluminium can only be bonded with a suitable pre-treatment or a primer.
Bonding of materials with different linear expansion must be evaluated regarding their long-time performance!