Region:
TECH-MASTERS GroupChanging region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Bond Seal Super

BOND SEAL SUPER is the most high tech adhesive kit with an extremely quick and very powerful setting on the widest range of materials. This solvent and isocyanate-free assembly adhesive has a very high tensile strength and does not show signs of ageing. BOND SEAL SUPER is neutral and acid-free, and can be used on a variety of materials, even natural stone. BOND SEAL SUPER allows for 40 mm adhesive strips without any deformation.

  • Superior setting.
  • 1-component MS-Polymer.
  • No need for primer anymore.
  • Does not sag.
  • For indoor and outdoor use.
  • Extreme tensile strength 2,2 MPa.
  • Can be applied on humid background.
  • Hardens quickly.
  • Can be painted over.
Article nrNameContent
T534201Bond Seal Super white290ml

  • Technical data
  • Application and usage
  • Downloads

Basis: MS-polymer.
Form: pasty
Odour: characteristic
Application Temperature: + 5° C / + 40° C
Application rate (2,5 mm / 6,3 bar): 20 g/min
Flow (ISO 7390): < 2 mm
Density: 1,54 g/cm³
Flash point: > 100°C.
Skin over time (23° C / 50% RH): 15 min.
Curing after 24 hours (23° C / 50% RH): ± 2-3 mm/24 hours.

UV, weather and water resistant: yes
Frost resistant till -15° C during transport: yes
Temperature resistance after curing:
- 40° C / + 90° C
Mechanical properties: 2 mm film
Shore-A hardness (3s, DIN 53505): 60
100% Modulus (DIN 53504): 1,39 MPa
Tensile strength (DIN 53504): 2,2 MPa
Elongation at break (DIN 53504): 335 %
VOC content: 2,23-2,34 % (35,6-36,1 g/l)

  • For very quick assembly of the most varied building, automotive and construction materials.
  • Excellent adhesion of many substrates in the construction industry: Glass, Mirrors, glazed surfaces, enamel, epoxy, Polyester, Polystryren, panels, rigid PVC, Stainless steel, anodized aluminum, Stones, Concrete, Wood,…
  • Always apply on a clean, non-greasy surface, it can even be wet.
  • Use temperature +5°C up to +40°C.
  • Apply adhesive on one side by dotting and strokes.
  • Support is usually unnecessary thanks to its fast setting (test first).
  • Press down firmly on adhesive.

Bond Seal Super

BOND SEAL SUPER is the most high tech adhesive kit with an extremely quick and very powerful setting on the widest range of materials. This solvent and isocyanate-free assembly adhesive has a very high tensile strength and does not show signs of ageing. BOND SEAL SUPER is neutral and acid-free, and can be used on a variety of materials, even natural stone. BOND SEAL SUPER allows for 40 mm adhesive strips without any deformation.

  • Superior setting.
  • 1-component MS-Polymer.
  • No need for primer anymore.
  • Does not sag.
  • For indoor and outdoor use.
  • Extreme tensile strength 2,2 MPa.
  • Can be applied on humid background.
  • Hardens quickly.
  • Can be painted over.
Article nrNameContent
T534201Bond Seal Super white290ml

  • Technical data
  • Application and usage
  • Downloads

Basis: MS-polymer.
Form: pasty
Odour: characteristic
Application Temperature: + 5° C / + 40° C
Application rate (2,5 mm / 6,3 bar): 20 g/min
Flow (ISO 7390): < 2 mm
Density: 1,54 g/cm³
Flash point: > 100°C.
Skin over time (23° C / 50% RH): 15 min.
Curing after 24 hours (23° C / 50% RH): ± 2-3 mm/24 hours.

UV, weather and water resistant: yes
Frost resistant till -15° C during transport: yes
Temperature resistance after curing:
- 40° C / + 90° C
Mechanical properties: 2 mm film
Shore-A hardness (3s, DIN 53505): 60
100% Modulus (DIN 53504): 1,39 MPa
Tensile strength (DIN 53504): 2,2 MPa
Elongation at break (DIN 53504): 335 %
VOC content: 2,23-2,34 % (35,6-36,1 g/l)

  • For very quick assembly of the most varied building, automotive and construction materials.
  • Excellent adhesion of many substrates in the construction industry: Glass, Mirrors, glazed surfaces, enamel, epoxy, Polyester, Polystryren, panels, rigid PVC, Stainless steel, anodized aluminum, Stones, Concrete, Wood,…
  • Always apply on a clean, non-greasy surface, it can even be wet.
  • Use temperature +5°C up to +40°C.
  • Apply adhesive on one side by dotting and strokes.
  • Support is usually unnecessary thanks to its fast setting (test first).
  • Press down firmly on adhesive.