TECH-MASTERS GroupChanging region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia

Benzine HP

Product variant for

BENZINE HP is a high performance additive for
all petrol engines, that cleans all components having contact with fuel and safeguards technically reliable and economic operation.

  • Removes deposits and oxidation residue in fuel lines, injection needles, cylinders, spark plugs and combustion chambers.
  • Shown to reduce NOx emissions and hence guarantee optimal combustion
  • Safeguards fuel quality
  • Increases octane rating and improves performance
  • Safeguards the economical, ecological and safe functioning of the entire fuel system
  • Extends catalytic converter and lambda probe service life by ensuring optimal combustion
  • Saves fuel thanks to precision fuel injection and even combustion
Article nrNameContent
T710001Benzine HP300ml
T710002Benzine HP5l

» To the shop
  • Technical data
  • Application and usage
  • Downloads

Physical state: liquid
Odour: amine-like
pH-Value (at 20 °C): not determined DIN 19268
Changes in the physical state
Initial boiling point and boiling range: 82 °C
Flash point: <13 °C ISO 3679
Lower explosion limits: 0,6 vol. %

Upper explosion limits: 12 vol. %
Oxidizing properties Not oxidizing.
Density (at 20 °C): 0,756 g/cm³ DIN 51757
Water solubility: insoluble
Viscosity / kinematic (at 40 °C):
< 7 mm²/s DIN EN ISO 3104

    Replace the fuel filter:
    Pour in the filter, a part of the bottle BENZINE HP up to 50 ml, in any case not higher than 20/25% of the content of the filter add fuel to fill the filter, and reassemble.
    Pour the remaining approximately 250 ml product in the tank car.
    Start up the engine for about 30-45 sec. Then turn off. Leave it off for at least 5 minutes so that the mixture concentrated (Benzine HP + petrol) injectors act more aggressively, to melt even the most tenacious deposits.
    Start up the engine and run it until the regime has not been regularized.
    If possible at this stage perceive a scheme and irregular beats of the engine.
  • Application:
    If fuel consumption increases.
    Can be used in every service as a preventative.
    In cases in which unsuitable fuel is suspected.
    If E10 fuel is used:
    Recommended for direct injection petrol engines