TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia

Thermoflux Multicolour

THERMOFLUX MULTICOLOUR is a flexible, heat shrinkable tubing with an integrally bonded meltable adhesive inner lining, designed to provide permanent moisture proof encapsulation to a wide variety of substrates and uses; such as electrical wires, cable jackets, wire breakouts and electrical components. It has has a unique inner wall, which melts when heated and is forced into the crevices and penetrates by the shrinking action of the outer wall. When cooled the entire mass becomes a fl exible, tough homogeneous covering with a controlled wall thickness. This product is manufractured from radiation cross-linked polyolefins. It has a specially formulated adhesive inner wall. THERMOFLUX MULTICOLOUR shrinks to 1/4 of its supplied diameter and thus only three sizes are required to cover a full range of irregular shapes with widely varying applications.

  • Consists of two layers.
  • Outside layer shrinks - inside layer of adhesive melts.
  • Makes strong and waterproof connections.
  • Excellent corrosion, water, chemical and UV resistance.
  • High shrink ratio : 4 to 1.
  • Flame retardant.
  • 3 diameters cover a wide range of applications.
  • Available in 4 different colours: red, green, blue, white.
  • May be marked with rubber stamp or marker prior to shrinking. When heating, ink becomes permanent.
  • Fast, simple and safe to use.
Article nrNameContent
N825110Thermoflux Multicolour white 4/11pc.
N825120Thermoflux Multicolour blue 4/11pc.
N825130Thermoflux Multicolour green 4/11pc.
N825140Thermoflux Multicolour red 4/11pc.
N825210Thermoflux Multicolour white 8/21pc.
N825220Thermoflux Multicolour blue 8/21pc.
N825230Thermoflux Multicolour green 8/21pc.
N825240Thermoflux Multicolour red 8/21pc.
N825310Thermoflux Multicolour white 16/41pc.
N825320Thermoflux Multicolour blue 16/41pc.
N825330Thermoflux Multicolour green 16/41pc.

Operating temperature: -55 + 150°C.
Shrink temperature: 125°C.
Shrink ratio: 4/1.
Treksterkte ISO 37: 11.5 MPa.
Ultimate elongation ISO 37: 490%.
Flexibility: flexible.
Dielectric strength IEC 243: 30 MV/m (VDE 0303 P12).
Flame retardancy ASTM D 876,
ASTM D 2671:

Inner wall: no. Outer wall: yes,
no dripping, cracking or flowing of outer wall.
Fluid resistance ISO 18117 and ISO 37 immersion 24h at 23°C:
hydraulic fluid: excellent
aviation fuel F40: good
lubrication oil 0-149: good
Diesel fuel F54: good.
Volume resistivity ASTM D 257: 1 x 1015 Ohm/cm (VDE 0303 P13).

  • insulation and protection of wires and components
  • wire terminal protection
  • reinforcement of wire splices
  • protective covering of connecting terminals
  • prevention of electrolytic corrosion
  • water proofing
  • connection of underwater motor lead wires
  • insulation of neon tube leads
  • insulation and protection of automotive electrical parts
  • protection of coaxial cable connectors
  • synthetic, fuel and hydraulic oil resistant apllications
  • marking of cables and wires