Seal Flex HT black/grey

Product variant for

General «

General

Automotive

SEAL FLEX HT BLACK/GREY is a modified, uv-resistant sealant, based on acetoxy RTV silicone, that is essentially odorless. This non-corrosive silicone, with excellent adhesive properties, can be used on a wide variety of materials and especially where no discoloration or corrosion of sensitive materials is accepted.
SEAL FLEX HT BLACK/GREY forms a strong, tough, flexible and resilient elastomeric rubber, with excellent chemical and high temperature resistance, that maintains its flexibility at low temperatures and stability at high temperatures. Apply SEAL FLEX HT without using any extra tools directly from the pressure can.

The ideal gasket without molds
Workable in few minutes
Created for automotive applications
It fills the unevenness
Non corrosive
Immediate results on water or air
High chemical resistance; it resists also against engine oil
High pressure and UV resistance
Temperature range: -60°C to + 270°C, temporary up to 300°C
Easy to remove

Article nr	Name	Content
T571101	Seal Flex HT black 200ml	200ml
T571301	Seal Flex HT grey 200ml	200ml

» To the shop

Technical data
Application and usage
Downloads

Form: pasty
Material: acetoxy RTV silicone
Colour: black or grey
Odour: characteristic
Density (at 20°C): 1,04 g/cm³
Viscosity: non-sag paste
Tack-free time: 10 min
Cure time (at 23°C, 50% r.h.): 4mm/24h
Hardness Shore A: 25
Tensile strength: 1,8 MPa
Shear strength (alu, 1mm): 2,0 MPa
Elastic Modulus (100%): 0,52 MPa

Elongation at break: 500%
Recovery from deformation: 98%
Temperature resistance: -60°C to 270°C, temporary until 300°C
Dielectric strength: 20 kv/mm (ASTM D 419)
Dielectric constant: 3 at 1 Mhz (ASTM D 150)
Dielectric dissipation factor: 3x10-3 at 1 Mhz (ASTM D 150)
Volume resistivity: 2x1015 OHM cm (ASTM D 257)
Thermal conductivity: 315 cal/sec./cm², °C/cm
Shelf life: 24 months in unopened packing below 25°C

SEAL FLEX HT BLACK/GREY is developed for many industrial sealing and insulating application, including metal and glass construction, automotive, marine, mechanical engineering, screw thread connections, machine tools, maintenance, connections, air ducts, inlet and outlet manifolds, compressors, pumps, turbines, electrical/electronic, aerospace and consumer products. insulating and moisture-proofing of engine and electrical boxes.
Sealing of water leakages on rear lights and body joints.

SEAL FLEX HT BLACK/GREY is jointing to: metals and different alloys, glass, ceramics and several kinds of synthetic materials
SEAL FLEX HT BLACK/GREY is resistant to: light acids (up to 20%), glycol, fluor-chlorine-methane, butane, oils, greases, lubricants, petrol, kerosene, transmission and brake fluids, water, steam, antifreeze agents, fuel oil, alkali, saline solutions
For an optimal adhesion, the surfaces should be dry and free from corrosion, oil/grease or dust. Therefore we recommend cleaning the surface with a solvent.
We recommend to test SEAL FLEX HT on the substrate before use.

pdf Product Information
techmasters_en_sef-b_PDS.pdftechmasters_en_sef-b_PDS.pdf (3.4 MB)

pdf MSDS T571302 Seal Flex HT grey 310ml V2
MSDS_T571302_Seal_Flex_HT_grey_310ml_T571302_V2_en_AT.pdfMSDS_T571302_Se...02_V2_en_AT.pdf (297.8 KB)

pdf MSDS T571102 Seal Flex HT black 310ml V2
MSDS_T571102_Seal_Flex_HT_black_310ml_T571102_V2_en_AT.pdfMSDS_T571102_Se...02_V2_en_AT.pdf (297.9 KB)

pdf MSDS T571101 Seal Flex HT black 200ml V2
MSDS_T571101_Seal_Flex_HT_black_200ml_T571101_V2_en_AT.pdfMSDS_T571101_Se...01_V2_en_AT.pdf (297.8 KB)

pdf MSDS T571301 Seal Flex HT grey 200ml V2
MSDS_T571301_Seal_Flex_HT_grey_200ml_T571301_V2_en_AT.pdfMSDS_T571301_Se...01_V2_en_AT.pdf (297.8 KB)

Seal Flex HT black/grey

Product variant for

«

General

Automotive

Article nr	Name	Content
T571101	Seal Flex HT black 200ml	200ml
T571301	Seal Flex HT grey 200ml	200ml

» To the shop

Application and usage
Downloads

pdf Product Information
techmasters_en_sef-b_PDS.pdftechmasters_en_sef-b_PDS.pdf (3.4 MB)

pdf MSDS T571302 Seal Flex HT grey 310ml V2
MSDS_T571302_Seal_Flex_HT_grey_310ml_T571302_V2_en_AT.pdfMSDS_T571302_Se...02_V2_en_AT.pdf (297.8 KB)

pdf MSDS T571102 Seal Flex HT black 310ml V2
MSDS_T571102_Seal_Flex_HT_black_310ml_T571102_V2_en_AT.pdfMSDS_T571102_Se...02_V2_en_AT.pdf (297.9 KB)

pdf MSDS T571101 Seal Flex HT black 200ml V2
MSDS_T571101_Seal_Flex_HT_black_200ml_T571101_V2_en_AT.pdfMSDS_T571101_Se...01_V2_en_AT.pdf (297.8 KB)

pdf MSDS T571301 Seal Flex HT grey 200ml V2
MSDS_T571301_Seal_Flex_HT_grey_200ml_T571301_V2_en_AT.pdfMSDS_T571301_Se...01_V2_en_AT.pdf (297.8 KB)

Seal Flex HT black/grey

Product variant for

«

General

Automotive

SEAL FLEX HT BLACK/GREY is a modified, uv-resistant sealant, based on acetoxy RTV silicone, that is essentially odorless. This non-corrosive silicone, with excellent adhesive properties, can be used on a wide variety of materials and especially where no discoloration or corrosion of sensitive materials is accepted.
SEAL FLEX HT BLACK/GREY forms a strong, tough, flexible and resilient elastomeric rubber, with excellent chemical and high temperature resistance, that maintains its flexibility at low temperatures and stability at high temperatures. Apply SEAL FLEX HT without using any extra tools directly from the pressure can.

The ideal gasket without molds
Workable in few minutes
Created for automotive applications
It fills the unevenness
Non corrosive
Immediate results on water or air
High chemical resistance; it resists also against engine oil
High pressure and UV resistance
Temperature range: -60°C to + 270°C, temporary up to 300°C
Easy to remove

Article nr	Name	Content
T571101	Seal Flex HT black 200ml	200ml
T571301	Seal Flex HT grey 200ml	200ml

» To the shop

Technical data
Application and usage
Downloads

Form: pasty
Material: acetoxy RTV silicone
Colour: black or grey
Odour: characteristic
Density (at 20°C): 1,04 g/cm³
Viscosity: non-sag paste
Tack-free time: 10 min
Cure time (at 23°C, 50% r.h.): 4mm/24h
Hardness Shore A: 25
Tensile strength: 1,8 MPa
Shear strength (alu, 1mm): 2,0 MPa
Elastic Modulus (100%): 0,52 MPa

Elongation at break: 500%
Recovery from deformation: 98%
Temperature resistance: -60°C to 270°C, temporary until 300°C
Dielectric strength: 20 kv/mm (ASTM D 419)
Dielectric constant: 3 at 1 Mhz (ASTM D 150)
Dielectric dissipation factor: 3x10-3 at 1 Mhz (ASTM D 150)
Volume resistivity: 2x1015 OHM cm (ASTM D 257)
Thermal conductivity: 315 cal/sec./cm², °C/cm
Shelf life: 24 months in unopened packing below 25°C

SEAL FLEX HT BLACK/GREY is developed for many industrial sealing and insulating application, including metal and glass construction, automotive, marine, mechanical engineering, screw thread connections, machine tools, maintenance, connections, air ducts, inlet and outlet manifolds, compressors, pumps, turbines, electrical/electronic, aerospace and consumer products. insulating and moisture-proofing of engine and electrical boxes.
Sealing of water leakages on rear lights and body joints.

SEAL FLEX HT BLACK/GREY is jointing to: metals and different alloys, glass, ceramics and several kinds of synthetic materials
SEAL FLEX HT BLACK/GREY is resistant to: light acids (up to 20%), glycol, fluor-chlorine-methane, butane, oils, greases, lubricants, petrol, kerosene, transmission and brake fluids, water, steam, antifreeze agents, fuel oil, alkali, saline solutions
For an optimal adhesion, the surfaces should be dry and free from corrosion, oil/grease or dust. Therefore we recommend cleaning the surface with a solvent.
We recommend to test SEAL FLEX HT on the substrate before use.