TECH-MASTERS GroupChanging region
SEAL & BOND MS40 TRANS is a strong sealing agent based on MS-polymer.
SEAL & BOND MS40 TRANS is an ideal sealing agent.
SEAL & BOND MS40 TRANS has good bonding capacities on most building materials.
SEAL & BOND MS40 TRANS prevents fungoid growth and bacteria.
SEAL & BOND MS40 TRANS does not make any stains.
SEAL & BOND MS40 TRANS can be applied on moist surfaces.
| Article nr | Name | Content |
|---|---|---|
| N599610 | Novatwister | 1 pc. |
Bonding: excellent on tiles, cement, natural stone, wood, concrete, aluminium; on PP, PE, PTFE and bitumen no bonding guaranteed.
Colour invariability: colour change can be caused by external circumstances.
Can be repainted: OK with most solvent- and waterbased lacquers.
Chemical resistance: good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes; moderate: esters, ketones, aromatics;
bad: concentrated acids, chlorinated solvents, swimming pool water.
Elongation after fracture - DIN 53504: > 250%.
Flow: 5 bar / 3 mm / 23°C 160 g/min.
Skin cure: 23°C 50% R.V. 5 minutes.
Non-adhering: 23°C 50% R.V. 40 minutes.
Full cure time: 23°C 50% R.V.:
24 u - 4 mm, 48 u - 5 mm, 72 u - 8 mm.
Max. allowable deformation: 20% (acc. ISO 9046).
Expansion joint: ISO 11600 F 20% HM E.
Hardness - DIN 53505: 40 Shore A.
Tensile strength: 220 N/cm².
Tear strength - DIN 53507: ca. 40N/cm².
Thermal stability: -30°C to +95°C.
Peak: 155°C max. 30 min.
Volume shrinkage after cure: < 2%.
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.
SEAL & BOND MS40 TRANS is a strong sealing agent based on MS-polymer.
SEAL & BOND MS40 TRANS is an ideal sealing agent.
SEAL & BOND MS40 TRANS has good bonding capacities on most building materials.
SEAL & BOND MS40 TRANS prevents fungoid growth and bacteria.
SEAL & BOND MS40 TRANS does not make any stains.
SEAL & BOND MS40 TRANS can be applied on moist surfaces.
| Article nr | Name | Content |
|---|---|---|
| N599610 | Novatwister | 1 pc. |
Bonding: excellent on tiles, cement, natural stone, wood, concrete, aluminium; on PP, PE, PTFE and bitumen no bonding guaranteed.
Colour invariability: colour change can be caused by external circumstances.
Can be repainted: OK with most solvent- and waterbased lacquers.
Chemical resistance: good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes; moderate: esters, ketones, aromatics;
bad: concentrated acids, chlorinated solvents, swimming pool water.
Elongation after fracture - DIN 53504: > 250%.
Flow: 5 bar / 3 mm / 23°C 160 g/min.
Skin cure: 23°C 50% R.V. 5 minutes.
Non-adhering: 23°C 50% R.V. 40 minutes.
Full cure time: 23°C 50% R.V.:
24 u - 4 mm, 48 u - 5 mm, 72 u - 8 mm.
Max. allowable deformation: 20% (acc. ISO 9046).
Expansion joint: ISO 11600 F 20% HM E.
Hardness - DIN 53505: 40 Shore A.
Tensile strength: 220 N/cm².
Tear strength - DIN 53507: ca. 40N/cm².
Thermal stability: -30°C to +95°C.
Peak: 155°C max. 30 min.
Volume shrinkage after cure: < 2%.
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.
