TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia

Safety Clean

SAFETY CLEAN is a safe and fast multipurpose solvent-degreaser that leaves no oily film. SAFETY CLEAN is a 100% aliphatic hydrocarbon solvent that contains no reclyded solvents. SAFETY CLEAN is safe in use on most plastics as well as on painted surfaces, vinyl en glass.

  • Leaves no oily film.
  • Fast, thorough and safe degreasing and cleaning.
  • Can be used on painted surfaces, vinyl, glass, rubber formica and plastics.
  • Fast drying.
  • Very economical.
  • Removes adhesives, sealants, oil, grease, silicon, wax, tar, paraffin, printing ink, ....
  • Recommended to be used with all Novatio adhesives and sealants.
Article nrNameContent
N204011Safety Clean1l
N683001Safety Clean500ml
N683002Safety Clean2l
N683005Safety Clean5l
N683025Safety Clean25l
N683200Safety Clean200l
N699900Tap for 200l drum1pc.
N741901Pump for Novafuel Powerkleen RFU 5l1pc.
N741902Pump for Novafuel Powerkleen RFU 25l1pc.

Apperance: Liquid
Odour: Characteristic
Explostion limits: 0,6 - 7 vol%
Flammability: Flammable liquid and vapour
Dynamic viscosity (at 20°C): 1 mPa.s
Kinematic viscosity (at 20°C): 1 mm²/s
Boiling point/boiling range: 130°C - 166°C
Flash point: 24°C
Evaporation rate: 0,35; butyl acetate
Vapour pressure (at 230°C): 4.6 hPa
Solubility in water: insoluble
Relative density (at 20°C): 0,764
Auto-ignition temperature: 200°C
Specific technical information for each packaging:
please consult the safety data sheet.
Always rinse the cleaned surface with water.

Appearance: Aerosol
Odour: Characteristic
Explosion limits: 0,6 - 9,5 vol%
Flammability: Extremely flammable aerosol
Dynamic viscosity (at 20°C): 700 mPa.s
Kinematic viscosity (at 20°C): 921 mm²/s
Boiling point/boiling range : -45°C - 166°C
Evaporation rate: 0,35; butyl acetate
Relative vapour density: > 1
Vapour pressure (at 20°C): 8530 hPa
Solubility in water: Insoluble
Relative density (at 20°C): 0.76
Water solubility: Insoluble

  • degreasing and cleaning mechanical parts, motor, brakes, suspension
  • cleaning tools and workshop equipment - does not attack plastics
  • removal of stickers of masking tape adhesive residues
  • removal of previous grease layers before relubricating, e.g. door hinges
  • SAFETY CLEAN does not corrode the paint
  • removal of trims and bumper strips without damaging
  • removal of tar and other coating stains from both bodywork and plastic parts
  • removal of grease and oil stains from seat upholstery (always test first for colourfastness)
  • finishing of body joints sealed with NOVATIO sealants
  • cleaning of paint and undercoat before spray-painting (always use a 2-cloth system)
  • degreasing and cleaning of all surfaces before using NOVATIO adhesives and sealants
  • degreasing and cleaning mechanical parts of motors and machines
  • degreasing and cleaning tools and workshop equipment, hand tools and machines
  • cleaning rubber rolls in printers
  • quick and safe degreasing of ferrous and non-ferrous metals before bonding or painting
  • SAFETY CLEAN will not form an oxide layer with light metals
  • removal of stickers or labels adhesive residues
  • removal of grease and oil stains from textile (always test first the colour fastness)
  • removal of contact adhesive residues on formica in kitchen and furniture manufacturing
  • finishing of joints sealed with NOVATIO SEALBOND MS60 and NOVABOND 2
  • removal of previous grease and oil layers before relubricating degreasing and cleaning of all surfaces before using NOVATIO adhesives and sealants