Primer 903

PRIMER 903 has been developed for use during repairs and gluing all non fibre filled plastics with 2 component polyurethane systems. PRIMER 903 can be used with plastic components where the specific gravity is lighter than water. Never use PRIMER 903 on metals or fibre-filled plastics.

Ideal adhesive primer during 2-component gluing on non-fibre filled plastics.
The superior adhesive primer for all MS joint and glue cements.
Provides perfect adhesion on all types of powder coatings.
Prevents moisture seepage between the joint cement and frames or doors.
Apply, allow it to evaporate, glue and ready.

Artikelnummer	Artikelname	Content
N590913	Primer 903	150ml

Technical data
Application and usage
Downloads

Appearance (at 20°C): aerosol.
Odour: solvent.
Flaspoint/flammability 60 oC (propellant) Explosion limits (danger of explosion) 14 – 32 vol% (propellant).
Vapour pressure (at 20°C): 4000 hPa.
Relative density (at 20°C): 0.73.
Water solubility: not suluble.
Soluble in: ethanol, ether.
Relative vapour density: > 2.
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

can be used in combination with the following products:
NOVA POWER GRIP
MEGAPLAST PU
MEGAPLAST MM
HIGH TECH TAPE
HIGH TECH TAPE TRANSPARENT ...
repairing hard and flexible plastics such as headlamps, bumpers, decorative strips, plastic panels, ...

pdf Primer 903
techmasters_en_pri903_PDS.pdf (380.9 KB)

pdf Primer 903
techmasters_en_pri903_PDS.pdf (581.8 KB)