Menu
Region:
TECH-MASTERS GroupChanging region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group
+43 7242 9396 1650

LPG Benzine HP

Product variant for
 «
Automotive

LPG BENZINE HP is a specially developed
concentrate for LPG (Liquefied Petroleum Gas)
and CNG (Compressed Natural Gas) engines. LPG BENZINE HP reduces valve wear and tear (impact damage) and safeguards long-term fuel stability.

  • Prevents petrol fuel oxidation due to age
  • Prevents deposits in the fuel system thanks to its Keep Clean Effect
  • Optimally protects against valve impact damage
  • Minimizes wear and tear
  • Protects the entire fuel system against corrosion
  • Prevents the formation of residue
Article nrNameContent
T712001LPG Benzine HP300ml

  • Technical data
  • Application and usage
  • Downloads

Physical state: liquid
Colour: yellow, clear
Odour: solvent like
pH-Value (at 20 °C): not determined DIN 19268
Initial boiling point and boiling range: 110 °C
Flash point: 30 °C ISO 3679
Lower explosion limits: 0,6 vol. %

Upper explosion limits: 7 vol. %
Oxidizing properties: Not oxidizing.
Density (at 20 °C): 0,8225 g/cm³ DIN 51757
Water solubility: easily soluble
Viscosity / kinematic (at 40 °C):
< 7 mm²/s DIN EN ISO 3104

  • APPLICATION
    When converting to LPG
    When servicing the system
    When repairing the system
    Also suitable for CNG engines
  • USE
    Add the contents of the tin to the petrol tank.
    Dosage:
    One tin suffices for up to 80 litres of fuel.
    Minimum filling level 10 litres.
  • USING STRONG:
    With the engine off, disconnect the inlet tube of the gas (LPG or CNG) from flute injectors after the filter of low pressure.
    With a dispenser enter up to 50 ml of LPG GASOLINE HP in the tube. Replace and tighten the tube.
    Turn on the car (petrol), as the system will be converted to LPG or CNG turn off the car or switchare of gasoline for 10-15 minutes, so the product will act directly on the injectors gas. If necessary repeat the process until you have the perfect operation of the injectors. The rest of the product (250 ml) should be poured into the gas tank (soft treatment: 300ml only in the fuel tank).
pdf Product Information
techmasters_en_adl_PDS.pdftechmasters_en_adl_PDS.pdf (3.7 MB)
pdf MSDS_EN
techmasters_en_adl_MSDS_LPG Benzine HP_en_2020-04-03_MSDS.pdftechmasters_en_...-04-03_MSDS.pdf (210.3 KB)