Fix Primer

FIX PRIMER prevents gluing problems when
glueing difficult materials such as: Polyehtylene
(PE), Polypropylene (PP), PMMA, bakelite,
Polycarbonate, Viton rubber, polyolefi ns, PTFE,
silicone, etc.
FIX PRIMER provides very good adhesion strength.
FIX PRIMER seldom leaves traces behind.
FIX PRIMER can be used during gluing wih AL-FIx, Al-Fix Gel, Al-Fix Flexible and Al-Fix Black.
FIX PRIMER can also provide good results in combination with High Tech Tape, High Tech Tape Transparent, HCS Tape, etc.
FIX PRIMER handicaps adhesion on untreated metals and stainless steel.

transparent primer to glue difficult plastics
opens the pores in plastics
improves adhesive strength
easy to use

Article nr	Name	Content
N502110	Fix Primer	50ml

Technical data
Application and usage
Downloads

Solvent base: heptane
Colour: transparent
Vaporisation time: < 10 seconds
Viscosity: 3-6 cps
Flash point: -12°C
Shelf life: 2 months at 20°C

Drying time: < 30 seconds
Drawing strength: depending on the material
3-10 N/mm
Optimum drawing strength: after 24 hours

FIX PRIMER promotes adhesion when glueing most synthetic materials: Polyethylene (PE), Polypropylene (PP), Nitrile, Neoprene, silicone rubbers, ABS, soft PVC, POM (polyoxymethylene), PET and EVA (Ethylene Vinyl Acetate), PMMA, Bakelite, Polycarbonate, Viton rubber, Polyolefins, Poly Tetra Fluor Ethylene (PTFE), the newest thermoplastic elastomers, etc..
But also wood, stone and metals on the above materials and all of these plastics synthetic materials mutually.
Surfaces must be clean, dry and grease free. Degrease with Novatio Sure Clean. Roughening promotes adhesion. Apply Fix Primer thinly on both surfaces. Allow Fix Primer to dry before applying the glue. Apply glue or tape.

pdf Product Information
techmasters_en_fip_PDS.pdftechmasters_en_fip_PDS.pdf (451.7 KB)

Fix Primer

transparent primer to glue difficult plastics
opens the pores in plastics
improves adhesive strength
easy to use

Article nr	Name	Content
N502110	Fix Primer	50ml

Technical data
Application and usage
Downloads

Solvent base: heptane
Colour: transparent
Vaporisation time: < 10 seconds
Viscosity: 3-6 cps
Flash point: -12°C
Shelf life: 2 months at 20°C

Drying time: < 30 seconds
Drawing strength: depending on the material
3-10 N/mm
Optimum drawing strength: after 24 hours

FIX PRIMER promotes adhesion when glueing most synthetic materials: Polyethylene (PE), Polypropylene (PP), Nitrile, Neoprene, silicone rubbers, ABS, soft PVC, POM (polyoxymethylene), PET and EVA (Ethylene Vinyl Acetate), PMMA, Bakelite, Polycarbonate, Viton rubber, Polyolefins, Poly Tetra Fluor Ethylene (PTFE), the newest thermoplastic elastomers, etc..
But also wood, stone and metals on the above materials and all of these plastics synthetic materials mutually.
Surfaces must be clean, dry and grease free. Degrease with Novatio Sure Clean. Roughening promotes adhesion. Apply Fix Primer thinly on both surfaces. Allow Fix Primer to dry before applying the glue. Apply glue or tape.

pdf Product Information
techmasters_en_fip_PDS.pdftechmasters_en_fip_PDS.pdf (451.7 KB)