Clear Lube-S

Product variant for

General «

General

Automotive

CLEAR LUBE-S is a specially composed lubricant based on acrylate copolymers and neutral, synthetic oils, mixed with aliphatic and a small quantity of aromatic petroleum distillates to increase its penetrating effect.
CLEAR LUBE-S contains PTFE to increase the standing time and to lower the resistance to sliding.
CLEAR LUBE-S has been specially developed for use in the most extreme conditions.
CLEAR LUBE-S even retains its good lubricating and protective characteristics in case of constant contact with water and weak acids.
CLEAR LUBE-S protects against corrosion by forming a thin polymer film layer, although it still penetrates deeply into the objects being lubricated.
CLEAR LUBE-S can be used in a large temperature range without changing viscosity.
Due to its high adhesive capacity CLEAR LUBE-S resists high-pressure cleaning.
CLEAR LUBE-S reduces chain friction and wear and extends the life span of a chain by up to 10 times of the normal length.
CLEAR LUBE-S is safe to use with rubbers and plastics.

Transparent.
Extreme adhesion.
Maintains viscosity at temperatures between -45°C and +250°C.
Ideal for heavy duty applications.

Article nr	Name	Content
N214002	Clear Lube-S	400ml

» To the shop

Technical data
Application and usage
Downloads

Basis: acrylate - copolymers = neutral oil.
Solvent: aliphatic hydrocarbons with a slight quantity of aromatics.
Additives: PTFE.
Solubility in water: insoluble.
Appearance: liquid.
Odour: characteristic.
Viscosity mPa.s 20°C: 1300.
Vapour pressure 20°C Pa: 19000.

Relative density/20°C: 0.750.
Spontaneous ignition: 365°C.
Flash point: < -20°C.
Boiling point / boiling range °C: 60 - 300.
Temperature resistance: -45°C to +250°C.

Shelf life: 36 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

long-lasting lubrication and protection of gear wheels, couplings, cables, guides, ball bearings, hinges, sliding rods, o-ring chains, etc.
CLEAR LUBE-S is resistant against steam, most acids, chemicals, friction andweather influences

pdf Product Information
techmasters_en_clb-s_PDS.pdftechmasters_en_clb-s_PDS.pdf (2.9 MB)

pdf MSDS DE
techmasters_en_clb-s_CLEAR LUBE S_SDS_DE_210619_MSDS.pdftechmasters_en_...210619_MSDS.pdf (491.3 KB)

pdf MSDS EN
techmasters_en_clb-s_CLEAR LUBE S_SDS_EN_210619_MSDS.pdftechmasters_en_...210619_MSDS.pdf (465.3 KB)

Clear Lube-S

Product variant for

«

General

Automotive

Article nr	Name	Content
N214002	Clear Lube-S	400ml

» To the shop

Application and usage
Downloads

pdf Product Information
techmasters_en_clb-s_PDS.pdftechmasters_en_clb-s_PDS.pdf (2.9 MB)

Clear Lube-S

Product variant for

«

General

Automotive

CLEAR LUBE-S is a specially composed lubricant based on acrylate copolymers and neutral, synthetic oils, mixed with aliphatic and a small quantity of aromatic petroleum distillates to increase its penetrating effect.
CLEAR LUBE-S contains PTFE to increase the standing time and to lower the resistance to sliding.
CLEAR LUBE-S has been specially developed for use in the most extreme conditions.
CLEAR LUBE-S even retains its good lubricating and protective characteristics in case of constant contact with water and weak acids.
CLEAR LUBE-S protects against corrosion by forming a thin polymer film layer, although it still penetrates deeply into the objects being lubricated.
CLEAR LUBE-S can be used in a large temperature range without changing viscosity.
Due to its high adhesive capacity CLEAR LUBE-S resists high-pressure cleaning.
CLEAR LUBE-S reduces chain friction and wear and extends the life span of a chain by up to 10 times of the normal length.
CLEAR LUBE-S is safe to use with rubbers and plastics.

Transparent.
Extreme adhesion.
Maintains viscosity at temperatures between -45°C and +250°C.
Ideal for heavy duty applications.

Article nr	Name	Content
N214002	Clear Lube-S	400ml

» To the shop

Technical data
Application and usage
Downloads

Basis: acrylate - copolymers = neutral oil.
Solvent: aliphatic hydrocarbons with a slight quantity of aromatics.
Additives: PTFE.
Solubility in water: insoluble.
Appearance: liquid.
Odour: characteristic.
Viscosity mPa.s 20°C: 1300.
Vapour pressure 20°C Pa: 19000.

Relative density/20°C: 0.750.
Spontaneous ignition: 365°C.
Flash point: < -20°C.
Boiling point / boiling range °C: 60 - 300.
Temperature resistance: -45°C to +250°C.

Shelf life: 36 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

long-lasting lubrication and protection of gear wheels, couplings, cables, guides, ball bearings, hinges, sliding rods, o-ring chains, etc.
CLEAR LUBE-S is resistant against steam, most acids, chemicals, friction andweather influences

pdf Product Information
techmasters_en_clb-s_PDS.pdftechmasters_en_clb-s_PDS.pdf (2.9 MB)

pdf MSDS DE
techmasters_en_clb-s_CLEAR LUBE S_SDS_DE_210619_MSDS.pdftechmasters_en_...210619_MSDS.pdf (491.3 KB)

pdf MSDS EN
techmasters_en_clb-s_CLEAR LUBE S_SDS_EN_210619_MSDS.pdftechmasters_en_...210619_MSDS.pdf (465.3 KB)