Butaseal

BUTASEAL is a double-sided adhesive and sealing
band on roll.
BUTASEAL remains flexible and does not harden
due to its unique composition based on modified
butylene rubbers.
BUTASEAL offers a very high immediate bonding strength, even on materials that are difficult to bond.
Due to its flexible composition, BUTASEAL adapts itself perfectly to any substrate and can be used perfectly in combination with one-component adhesives that harden much ‘slower’.

Very high “immediate” bonding strength.
For both bonding and sealing.
Temperature resistant from -30°C to +80°C.
Remains flexible, does not harden.
Follows perfectly the unevennesses of the substrate.
Well mouldable.
For both permanent and temporary fixings.
Easy and clean application.
Very good adhesion, also on “difficult” materials.
Available in black and grey.

Article nr	Name	Content
N551158	Butaseal black 15mm x 1,5mm x 25m	1 pc.
N552258	Butaseal grey 25mm x 1mm x 35m	1pc.

Technical data
Application and usage
Downloads

BLACK
Thickness: 1.5 mm
Width: 15 mm
Langth/roll: 30 m
Mass/m²: 2400g/m2
Tensile strength 100mm/min: 0.20 Mpa
Shear strength 10mm/min: 0.029 Mpa
Flow at 70°C: 0%
Temperature resistance: -30°C+80°C
Application temperature: +5°C

First test foundations based on PE, PP, silicones and bitumen for adhesion (see each tape).

LIGHT GREY

Thickness: 1 mm
Width: 25 mm
Length/roll: 35 m
Mass/m²: 1600g/m2
Tensile strength 100mm/min: 0.19 Mpa
Shear strength 10mm/min: 0.026 Mpa
Flow at 70°C: 0%
Temperature resistance: -30°C+80°C
Application temperature: +5°C

Shelf life: 24 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

INDUSTRY
flexible bonding - temporary or permanent - also on difficult materials
gives an immediate adhesion in combination with SEAL & BOND MS60
sealing of wire and cable passages
prevents galvanic action in metal constructions
prevents vibrations
makes water- and dampproof
bonding and sealing of PE foil
“instant” sealing on difficult places
as mouldable mastic for problematic cases
AUTOMOTIVE
bonding of plastic foil in doors and roof covering
sealing of front mudguards and bodywok parts
ideal for eliminating vibrations
sealing of cable passages, rear lights, surface mounted sliding roofs
fixing of upright decorative frames
waterproof mounting of antennas

pdf Produktinformation
techmasters_en_bsl_PDS.pdftechmasters_en_bsl_PDS.pdf (927.5 KB)