Region:
TECH-MASTERS GroupChanging region
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Bond & Fix

BOND&FIX is a styrene free methacrylate resin for
high performance fixing applications of threaded
rod in hollow or concrete blocks and rebar into
concrete and maronry.
BOND&FIX is a two compenents system (resin &
hardener). The chemical reaction between the two
components makes the mortar hardening. The resin changes the colour from blue to grey when it is cured.
BOND&FIX is easy to dispense and is fast in curing.
BOND&FIX is specially formulated for structural fixings and very technical sites: metallic racking or work into reinforced concrete.

  • Comfort security due to colour change of resin during curing time.
  • Easy to dispense and fast curing.
  • ETA certified for rods, rebar, concrete and masonry.
  • Styrene free.
  • Low smell.
  • Reclosable.
  • Non-flammable resin.
  • High performance: medium and heavy loads.
  • Works in damp conditions.
Article nrNameContent
T595001Bond & Fix280ml
Y595010Mixer Tip 280ml1 pc.
Y595013Brush17 mm1 pc.
Y595014Brush 30 mm1 pc.
Y595015Blowing Pump1 pc.
Y595016Sleeves M12x50150 pcs.
Y595017Sleeves M16x8550 pcs.
Y595018Sleeves M16x13040 pcs.
Y595019Sleeves M20x8530 pcs.
Y595020Brush 12 mm1 pc.

  • Technical data
  • Application and usage
  • Downloads

Physical state: Fluid liquid.
Ratio: 10:1.
Flexural resistance: 24.7 MPa according to ASTM D790-10.
Compressive strength: 60.9 MPa according to ASTM D695-08.
Density: 1.75.

Flash Point Interval : PE > 100°C.
Water solubility: Insoluble.
Storage: up to 15 months (25°C).
For detailed information please see the Technical Data table attached to the product datasheet.

  • INSTALLATION - CONCRETE:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:                     - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Dispenser adhesive until uniform colour appears. Inject resin using a dispensing tool. Fill hole one-half to two-thirds full, starting from bottom of hole, withdraw the nozzle after each trigger to prevent air pockets.
  • 4: Insert clean, oil-free threaded rod/rebar, turning slowly until anchor/threaded rod reaches bottom of hole.
  • 5: Threaded rod/rebar can be adjusted and/or more resin added before working time elapses.
  •                                                                                          
  • INSTALLATION - MASONRY:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
    - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Insert Tech Masters sleeve.
  • 4: Dispenser adhesive until uniform colour appears. Fill sleeve by withdrawing nozzle one graduation after each trigger pull of dispensing tool.
  • 5: Insert clean, oil-free threaded rod, until it reaches bottom of sleeve.
  • 6: Rod can be adjusted and/or more resin can be added before working time elapses.
  • APPLICATION: Rebar connections, Threaded rod, Fixing of heavy metal structures, Balconnies, Facades, Racking

Bond & Fix

BOND&FIX is a styrene free methacrylate resin for
high performance fixing applications of threaded
rod in hollow or concrete blocks and rebar into
concrete and maronry.
BOND&FIX is a two compenents system (resin &
hardener). The chemical reaction between the two
components makes the mortar hardening. The resin changes the colour from blue to grey when it is cured.
BOND&FIX is easy to dispense and is fast in curing.
BOND&FIX is specially formulated for structural fixings and very technical sites: metallic racking or work into reinforced concrete.

  • Comfort security due to colour change of resin during curing time.
  • Easy to dispense and fast curing.
  • ETA certified for rods, rebar, concrete and masonry.
  • Styrene free.
  • Low smell.
  • Reclosable.
  • Non-flammable resin.
  • High performance: medium and heavy loads.
  • Works in damp conditions.
Article nrNameContent
T595001Bond & Fix280ml
Y595010Mixer Tip 280ml1 pc.
Y595013Brush17 mm1 pc.
Y595014Brush 30 mm1 pc.
Y595015Blowing Pump1 pc.
Y595016Sleeves M12x50150 pcs.
Y595017Sleeves M16x8550 pcs.
Y595018Sleeves M16x13040 pcs.
Y595019Sleeves M20x8530 pcs.
Y595020Brush 12 mm1 pc.

  • Technical data
  • Application and usage
  • Downloads

Physical state: Fluid liquid.
Ratio: 10:1.
Flexural resistance: 24.7 MPa according to ASTM D790-10.
Compressive strength: 60.9 MPa according to ASTM D695-08.
Density: 1.75.

Flash Point Interval : PE > 100°C.
Water solubility: Insoluble.
Storage: up to 15 months (25°C).
For detailed information please see the Technical Data table attached to the product datasheet.

  • INSTALLATION - CONCRETE:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:                     - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Dispenser adhesive until uniform colour appears. Inject resin using a dispensing tool. Fill hole one-half to two-thirds full, starting from bottom of hole, withdraw the nozzle after each trigger to prevent air pockets.
  • 4: Insert clean, oil-free threaded rod/rebar, turning slowly until anchor/threaded rod reaches bottom of hole.
  • 5: Threaded rod/rebar can be adjusted and/or more resin added before working time elapses.
  •                                                                                          
  • INSTALLATION - MASONRY:
  • 1: Drill hole to specified diameter and depth.
  • 2: Clean hole by brushing and blowing alternately:
    - Concrete Option 8: 2x blow (hand pump/6bar), 4x brush, 2x blow (hand pump/6bar) - compressed air (6bar) for drilled holes hₑf ≥ 10d or > Ø22mm.
    - Rebar : 2x blow (6bar), 2x brush, 2x blow (6bar).
    - Masonry, solid and perforated : 2x blow (hand pump), 2x brush, 2x blow (hand pump).
  • 3: Insert Tech Masters sleeve.
  • 4: Dispenser adhesive until uniform colour appears. Fill sleeve by withdrawing nozzle one graduation after each trigger pull of dispensing tool.
  • 5: Insert clean, oil-free threaded rod, until it reaches bottom of sleeve.
  • 6: Rod can be adjusted and/or more resin can be added before working time elapses.
  • APPLICATION: Rebar connections, Threaded rod, Fixing of heavy metal structures, Balconnies, Facades, Racking