Region:
TECH-MASTERS GroupStandort wird geändert
  • TECH-MASTERS Austria
  • TECH-MASTERS Germany
  • TECH-MASTERS Croatia
  • TECH-MASTERS Czech
  • TECH-MASTERS Poland
  • TECH-MASTERS Slovakia
  • TECH-MASTERS Hungary
  • TECH-MASTERS Romania
  • TECH-MASTERS Slovenia
  • TECH-MASTERS Italia
  • TECH-MASTERS Group

Al-Fix Gel

AL-FIX GEL is an adhesive which bonds in seconds and has a special formula based on Cyanacrylate. AL-FIX GEL is a one component adhesive which is solventless and consists mainly of Athyl Cyan- acrylate Monomer.                  AL-FIX GEL is temperature resistant in the range from -30°C to +100°C. AL-FIX GEL is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions. AL-FIX GEL joints have a high tensile shear strength and show no shrinkage.

  • Based on cyanacrylate.
  • Bonds in seconds.
  • No heating - no soldering - no mixing.
  • High tensile shear strength - shows no shrinkage.
  • Very economical - the thinner the adhesive, the stronger the joint.
ArtikelnummerArtikelnameContent
N501003Al-Fix20ml
N501080Al-Fix Remover20ml
N501100Al-Fix Filler20ml
N501104Al-Fix Aktivator200ml
N501111Al-Fix Aktivator SF150ml
N501205Al-Fix Gel20ml
N501303Al-Fix Black20ml
N501403Al-Fix Flexible20ml

Colour: crystal clear
Viscosity mPa´s Brookfield  20°C: 60.000 - 90.000
Specific gravity gr/cm² 20°C: 1.08
Flashpoint DIN 55213 in °C: 87
Initial hardening on alu in sec. at 23°C 50% n.v.:
60 - 100
on Nora Rubber: 12 - 25
on hard PVC: not appropriate
Shelf life: 12 months, keep dry, cool and
frost-proof.
Safety measures: consult the Safety Data Sheet.
 

  • AL-FIX GEL provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene, polypropylene and fluorine containing materials. AL-FIX GEL is recommended wehn a thicker adhesive seam and better filling is required. Materials which can be bonded with AL-FIX: ABS, aluminium, bakelite, bronze, buthyl, celluloid, chloroprene, chrome, delrin, glass, copper, natural rubber, NBR, neoprene, nitril, nylon, phenol, polycarbonate , polystyrene, porcelain, hard pvc, stainless steel.
  • On porous materials we recommend using AL-FIX AKTIVATOR OR AL-FIX AKTIVATOR SF.