Al-Fix

Product variant for

General «

General

Automotive

Al-FIX is an adhesive which bonds in seconds
and has a special formula based on Cyanacrylate.
AL-FIX is a one component adhesive which is
solventless and consists mainly of Athyl Cyan- acrylate Monomer. AL-FIX is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions.
AL-FIX joints have a high tensile shear strength and show no shrinkage.

Based on cyanacrylate.
Bonds in seconds.
No heating - no soldering - no mixing.
High tensile shear strength - shows no shrinkage.
Very economical - the thinner the adhesive, the stronger the joint.

Article nr	Name	Content
N501003	Al-Fix	20ml
N501005	Al-Fix	50ml
N501023	Al-Fix	500g
N501080	Al-Fix Remover	20ml
N501100	Al-Fix Filler	20ml
N501104	Al-Fix Aktivator	200ml
N501111	Al-Fix Aktivator SF	150ml
N501205	Al-Fix Gel	20ml
N501303	Al-Fix Black	20ml
N501403	Al-Fix Flexible	20ml

» To the shop

Technical data
Application and usage
Downloads

Physical form: liquid
Odour: characteristic
Colour: colourless
Boiling point: 150°C
Relative densitiy: 1,05
Absolute density: 1050 kg/m³
Auto-ignition temperature: 500°C
Flash point: 87°C

Viscosity at 20°C (Brookfield): 100-150 mPa.S.
Specific gravity at 20°C: 1.06 g/cm².
Initial hardening (at 23°C and 50% N.V.):
alu: 2 to 10 sec., on Nora Rubber: ≤ 5 sec.,
on PVC: 2 to 10 sec.
Temperature resistance: -50 up to +120°C (peak +150° C).
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

AL-FIX provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene, polypropylene and fluorine containing materials. Materials which can be bonded with AL-FIX: ABS, aluminium, bakelite, bronze, buthyl, celluloid, chloroprene, chrome, delrin, glass, copper, natural rubber, NBR, neoprene, nitril, nylon, phenol, polycarbonate , polystyrene, porcelain, hard pvc, stainless steel.

On porous materials we recommend using AL-FIX AKTIVATOR OR AL-FIX AKTIVATOR SF.
You can also use AL-FIX ACTIVATOR as a primer to prepare the substrate.

For an optimal adhesion on aluminium please roughen/sand the aluminium first.

pdf Product Information
techmasters_en_afx_PDS.pdftechmasters_en_afx_PDS.pdf (1.8 MB)

pdf MSDS DE
techmasters_en_afx_AL-FIX_SDS_DE_220728_MSDS.pdftechmasters_en_...220728_MSDS.pdf (456.9 KB)

pdf MSDS EN
techmasters_en_afx_AL-FIX_SDS_EN_220728_MSDS.pdftechmasters_en_...220728_MSDS.pdf (433.2 KB)

Al-Fix

Product variant for

«

General

Automotive

Article nr	Name	Content
N501003	Al-Fix	20ml
N501005	Al-Fix	50ml
N501023	Al-Fix	500g
N501080	Al-Fix Remover	20ml
N501100	Al-Fix Filler	20ml
N501104	Al-Fix Aktivator	200ml
N501111	Al-Fix Aktivator SF	150ml
N501205	Al-Fix Gel	20ml
N501303	Al-Fix Black	20ml
N501403	Al-Fix Flexible	20ml

» To the shop

Application and usage
Downloads

pdf Product Information
techmasters_en_afx_PDS.pdftechmasters_en_afx_PDS.pdf (1.8 MB)

Al-Fix

Product variant for

«

General

Automotive

Al-FIX is an adhesive which bonds in seconds
and has a special formula based on Cyanacrylate.
AL-FIX is a one component adhesive which is
solventless and consists mainly of Athyl Cyan- acrylate Monomer. AL-FIX is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions.
AL-FIX joints have a high tensile shear strength and show no shrinkage.

Based on cyanacrylate.
Bonds in seconds.
No heating - no soldering - no mixing.
High tensile shear strength - shows no shrinkage.
Very economical - the thinner the adhesive, the stronger the joint.

Article nr	Name	Content
N501003	Al-Fix	20ml
N501005	Al-Fix	50ml
N501023	Al-Fix	500g
N501080	Al-Fix Remover	20ml
N501100	Al-Fix Filler	20ml
N501104	Al-Fix Aktivator	200ml
N501111	Al-Fix Aktivator SF	150ml
N501205	Al-Fix Gel	20ml
N501303	Al-Fix Black	20ml
N501403	Al-Fix Flexible	20ml

» To the shop

Technical data
Application and usage
Downloads

Physical form: liquid
Odour: characteristic
Colour: colourless
Boiling point: 150°C
Relative densitiy: 1,05
Absolute density: 1050 kg/m³
Auto-ignition temperature: 500°C
Flash point: 87°C

Viscosity at 20°C (Brookfield): 100-150 mPa.S.
Specific gravity at 20°C: 1.06 g/cm².
Initial hardening (at 23°C and 50% N.V.):
alu: 2 to 10 sec., on Nora Rubber: ≤ 5 sec.,
on PVC: 2 to 10 sec.
Temperature resistance: -50 up to +120°C (peak +150° C).
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.

AL-FIX provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene, polypropylene and fluorine containing materials. Materials which can be bonded with AL-FIX: ABS, aluminium, bakelite, bronze, buthyl, celluloid, chloroprene, chrome, delrin, glass, copper, natural rubber, NBR, neoprene, nitril, nylon, phenol, polycarbonate , polystyrene, porcelain, hard pvc, stainless steel.

On porous materials we recommend using AL-FIX AKTIVATOR OR AL-FIX AKTIVATOR SF.
You can also use AL-FIX ACTIVATOR as a primer to prepare the substrate.

For an optimal adhesion on aluminium please roughen/sand the aluminium first.